lkml.org 
[lkml]   [2003]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectIDE-SCSI grabs too many drives
I have append="hdc=ide-scsi" in my lilo.conf file,
but when I modprobe ide-scsi, it grabs both the
CD-RW and the DVD-ROM:

SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Vendor: RAITE Model: RDR-108H Rev: 1.7
Type: CD-ROM ANSI SCSI revision: 02

Shouldn't it just make only hdc a SCSI drive?

If I unload ide-scsi and modprobe ide-cd instead, I get this:

hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)

Of course, I can't burn CD's with this configuration.

I want the CD-RW as a SCSI drive, and the DVD-ROM as an IDE drive.

For some reason, mplayer only works when the DVD-ROM is an IDE
device. If I try to use the SCSI equivalent, it hangs.

So, how do I get hdc as a SCSI drive, and hdd as an IDE drive?

Any and all help will be appreciated.

Andy Johnson

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:0.028 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site