Messages in this thread | | | From | Andreas Loong <> | Date | Sat, 28 Sep 2002 23:19:55 +0500 | Subject | PROBLEM: hangs early when ssh'ing in |
| |
SPARC SPURIOUS HANG
[1.] SPARC Watchdog reset
[2.] at various times when I SSH into the system, I get a watchdog reset and the machine drops down to the prom. This seems to happen most often when the machine just has booted. since it dies immediately, I have no output from the console. Once the machine has been up for a while, this doesn't seem to happen at all.
[3.] SSH watchdog reset
[4.] Linux version 2.4.19 (root@calamari) (gcc version 2.95.4 20011002 (Debian prerelease)) #5 SMP Wed Sep 25 14:16:58 CEST 2002
[7.1.] Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11n mount 2.11n modutils 2.4.15 e2fsprogs 1.27 Linux C Library 2.2.5 Dynamic linker (ldd) 2.2.5 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded openprom slip slhc sg autofs
[7.2.] cpu : ROSS HyperSparc RT625 or RT626 fpu : ROSS HyperSparc combined IU/FPU promlib : Version 3 Revision 2 prom : 2.25 type : sun4m ncpus probed : 4 ncpus active : 4 Cpu0Bogo : 99.73 Cpu1Bogo : 99.94 Cpu2Bogo : 99.94 Cpu3Bogo : 99.94 MMU type : ROSS HyperSparc contexts : 4096 nocache total : 1048576 nocache used : 398336 CPU0 : online CPU1 : online CPU2 : online CPU3 : online
[7.3.] Module information (from /proc/modules): slip 11764 0 (unused) slhc 4752 0 [slip] sg 30780 0 autofs 10772 0 (unused)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) nothing at all
[7.5.] PCI information ('lspci -vvv' as root) is there an equivalent command for sparc?
[7.6.] SCSI information (from /proc/scsi/scsi) Attached devices: Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SEAGATE Model: ST34371W SUN4.2G Rev: 7462 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: SEAGATE Model: ST39173W SUN9.0G Rev: 2815 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: YAMAHA Model: CRW3200S Rev: 1.0d Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02
[X.] Other notes, patches, fixes, workarounds: Seems to only happen just after it has booted. I'm rather new to linux and more heavy on the solaris side, but I would like to help solving these issues - only I don't know exactly how. seems like debian woody is shipped with gcc 2.95.4, not sure if this is relevant or not.
I have some time on my hands and I've notice a couple of weird things that I will report aswell, as long as someone could guide me through the process.
Wbr Andreas Loong
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |