Messages in this thread | | | From | "Drew J. Como" <> | Subject | PROBLEM: Kernel Panic for unknown reason | Date | Thu, 19 Sep 2002 11:27:59 -0400 |
| |
As per the information listed below, I have a system that will only kernel panic when traffic is being sent to him. If I disconnect all of the network cables, etc. and let him be, he doesn't panic.
Aug 30 00:15:37 (none) kernel: Unable to handle kernel paging request at virtual address 50182444 Aug 30 00:15:37 (none) kernel: printing eip: Aug 30 00:15:37 (none) kernel: c0135e0d Aug 30 00:15:37 (none) kernel: *pde = 00000000 Aug 30 00:15:37 (none) kernel: Oops: 0002 Aug 30 00:15:37 (none) kernel: CPU: 0 Aug 30 00:15:37 (none) kernel: EIP: 0010:[open_namei+633/1244] Not tainted Aug 30 00:15:37 (none) kernel: EFLAGS: 00010246 Aug 30 00:15:37 (none) kernel: eax: c2ec0c10 ebx: 00000000 ecx: c02b23bc edx: 00000003 Aug 30 00:15:37 (none) kernel: esi: c55c0000 edi: c5893f8c ebp: 00010801 esp: c5893f54 Aug 30 00:15:37 (none) kernel: ds: 0018 es: 0018 ss: 0018 Aug 30 00:15:37 (none) kernel: Process find (pid: 890, stackpage=c5893000) Aug 30 00:15:37 (none) kernel: Stack: 00010800 c55c0000 08057364 bffff4cc 00001000 00000000 00000004 c2ec0c10 Aug 30 00:15:37 (none) kernel: c012c3da c55c0000 00010801 08054538 c5893f8c 00000005 c2ec0c10 c7ffc350 Aug 30 00:15:37 (none) kernel: 08057364 bffff4cc 00000000 00000003 00000001 c012c717 c55c0000 00010800 Aug 30 00:15:37 (none) kernel: Call Trace: [filp_open+46/76] [sys_open+51/148] [system_call+51/56] Aug 30 00:15:37 (none) kernel: Aug 30 00:15:37 (none) kernel: Code: 00 8b 44 24 18 50 56 e8 c3 ef ff ff 89 c3 83 c4 08 85 db 00
# cat cpuinfo
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 997.532 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1992.29
# cat modules
ipt_LOG 3120 1 (autoclean) ipt_limit 960 1 (autoclean) ipt_REJECT 2784 11 (autoclean) ipt_MASQUERADE 1200 2 (autoclean) ipt_REDIRECT 736 1 (autoclean) ipt_state 608 4 (autoclean) iptable_filter 1728 1 (autoclean) ip_nat_ftp 2720 0 (unused) ip_conntrack_ftp 3472 0 (unused) iptable_nat 13168 2 (autoclean) [ipt_MASQUERADE ipt_REDIRECT ip_nat_ftp] ip_conntrack 14384 3 [ipt_MASQUERADE ipt_REDIRECT ipt_state ip_nat_ftp ip_conntrack_ftp iptable_nat] ip_tables 10528 10 [ipt_LOG ipt_limit ipt_REJECT ipt_MASQUERADE ipt_REDIRECT ipt_state iptable_filter iptable_nat]
# lspci -vvv
00:00.0 Host bridge: ServerWorks CNB20LE (rev 06) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 48, cache line size 08
00:00.1 Host bridge: ServerWorks CNB20LE (rev 06) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 48, cache line size 08
00:02.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08) Subsystem: Dell Computer Corporation: Unknown device 009b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ecc0 [size=64] Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fd000000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 00ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at e800 [size=256] Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: ServerWorks OSB4 (rev 50) Subsystem: ServerWorks OSB4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 08b0 [size=16]
00:0f.2 USB Controller: ServerWorks: Unknown device 0220 (rev 04) (prog-if 10 [OHCI]) Subsystem: ServerWorks: Unknown device 0220 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (20000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
01:02.0 SCSI storage controller: Adaptec 7899P (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 BIST result: 00 Region 0: I/O ports at dc00 [disabled] [size=256] Region 1: Memory at f9043000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at f8000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:02.1 SCSI storage controller: Adaptec 7899P (rev 01) Subsystem: Dell Computer Corporation: Unknown device 00ce Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (10000ns min, 6250ns max), cache line size 08 Interrupt: pin B routed to IRQ 11 BIST result: 00 Region 0: I/O ports at d800 [disabled] [size=256] Region 1: Memory at f9042000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at f8000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 0d) Subsystem: Intel Corporation: Unknown device 1050 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: Memory at f9041000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d4c0 [size=64] Region 2: Memory at f9020000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
01:0a.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 0d) Subsystem: Intel Corporation: Unknown device 1050 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f9040000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d480 [size=64] Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Please let me know if this is a hardware problem or ???...
Thanks for your help!!
============================================ Drew J. Como Phone: 631-434-6600 Systems Administrator Fax: 631-434-7800 dcomo@bascom.com Web: www.bascom.com Bascom Global Internet Services, Inc. -------------------------------------------- "When quality is the goal, winning is guaranteed."
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |