lkml.org 
[lkml]   [2002]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Part 2: Re: [PATCH] pdc20265 problem.
On  8 Aug 02 at 10:41, Andre Hedrick wrote:

> ide0 at 0xdfe0-0xdfe7,0xdfae on irq 31
> ide1 at 0xdfa0-0xdfa7,0xdfaa on irq 31
> ide2 at 0x1f0-0x1f7,0x3f6 on irq 14

This is definitely bug. It should assigned ide0 to the port
in legacy mode, as far as I can tell.

> PIIX4: IDE controller on PCI bus 00 dev 39
> PIIX4: device not capable of full native PCI mode
> PIIX4: device disabled (BIOS)
> PIIX4: device disabled (BIOS)
> hda: DupliDisk IDE RAID-1 Adapter( 1.19), ATA DISK drive
> hdc: QUANTUM FIREBALLP KA13.6, ATA DISK drive
> ide2: ports already in use, skipping probe
> ide0 at 0xd800-0xd807,0xdc02 on irq 18
> ide1 at 0xe400-0xe407,0xe802 on irq 18

You have disabled PIIX4 here, so ide0/1 were not reserved. I assume
that if you enable PIIX4, it will use legacy ports, and will become
ide0/1.
Petr Vandrovec

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:27    [W:0.037 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site