Messages in this thread | | | Date | Sat, 1 Jun 2002 23:07:43 -0400 | From | Whit Blauvelt <> | Subject | PROBLEM: Oops in 2.4.19-pre8 - supplement: lspci output |
| |
For what it's worth, here's spci output to go with my message this morning on the "kernel BUG at page_alloc.c:106!" Oops. I've since gone to 2.4.19-pre9-ac3, just in case that's improved in a way that matters, but since this Oops took awhile to show up after going to 2.4.19-pre8 (done after 2.4.16 did a hard crash without recoverable information, after being stable for many months ... hmm, 2 crashes ... hardware, obscure bug, or coincidence?)
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=7 SBA+ 64bit- FW- Rate=x1 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: e9000000-e97fffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at b400 [size=16]
00:07.3 PCI bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) (prog-if 00 [Normal decode]) !!! Invalid class 0604 for header type 00 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
00:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b800 [size=128] Region 1: Memory at e9800000 (32-bit, non-prefetchable) [size=128] Expansion ROM at e6000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at bc00 [size=128] Region 1: Memory at e9803000 (32-bit, non-prefetchable) [size=128] Expansion ROM at e7000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:0a.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 26) Subsystem: Tekram Technology Co.,Ltd. DC390F Ultra Wide SCSI Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4250ns min, 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at c000 [size=256] Region 1: Memory at e9801000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at e9802000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at e8000000 [disabled] [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 [VGA]) Subsystem: CardExpert Technology: Unknown device 6326 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e9000000 (32-bit, prefetchable) [size=8M] Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=64K] Region 2: I/O ports at 9000 [size=128] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 1.0 Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Thanks to whoever looks at this!
Whit - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |