Messages in this thread | | | Date | Sat, 18 May 2002 16:34:40 +0100 (BST) | From | Jeremy Elgar <> | Subject | ide-scsi Problems 2.4.18 |
| |
Hi Ive had the following problem for a while now but havent been able to solveit. My Set up is like this
its a VP6 MotherBoard 2Gb ram and dual P3 700's
I have 2 CD type devices (one dvd drive one cd burner)
the CD_RW (LG Brand) is on hda. the dvd HITACH DVD-ROM GD-2500 is on hdg
My disks are on the Highpoint controller (hde)
Im currently using 2.4.18-lkpc-4 (from lkpc.sourceforge.net) but have had the same issues with plain 2.4.18 + XFS.
using grip (for example) I can read data from the DVD drive (hde) for a while (sometimes all the way through other times after a few tracks, it seems to be dependent on what else im doing) then I start getting May 18 15:59:43 dido kernel: SCSI cdrom error : host 0 channel 0 id 1 lun 0 return code = 28000000 May 18 15:59:43 dido kernel: Info fld=0x0, ILI Current sd0b:01: sense key Illegal Request May 18 15:59:43 dido kernel: Additional sense indicates Illegal mode for this track May 18 15:59:43 dido kernel: I/O error: dev 0b:01, sector 0 May 18 15:59:43 dido kernel: FAT: unable to read boot sector May 18 15:59:43 dido kernel: SCSI cdrom error : host 0 channel 0 id 1 lun 0 return code = 28000000 May 18 15:59:43 dido kernel: Info fld=0x0, ILI Current sd0b:01: sense key Illegal Request May 18 15:59:43 dido kernel: Additional sense indicates Illegal mode for this track
in the log
using hda the drive will spin up but nothing will happen and Ill get the following in the log May 18 16:12:29 dido kernel: scsi : aborting command due to timeout : pid 12640, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00 00 00 00 0d 00 00 0d f8 00 00 hda: lost interupt
In both cases sometimes the machine will reboot with no errors in the log.
Im at a bit of a loss as to what to do. Im going to attempt to build the current kernel with out SMP and Highmem (seperatly and together) to see if I can remove the problem but was wondering if anyone had any ideas?
Is the physical devise layout okay? Pretty sure Ive had this working before okay ~2.4.14ish but I may have only had one drive (the CDRW) configured as ide-scsi.
Nothing very simular has come up in the archives but If I have missed something please tell me
Oh and yes I have tried turning off DMA etc using hdparam as suggested to someone else.
Thanks Jeremy
-- Even the samurai have teddy bears, and even the teddy bears get drunk.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |