Messages in this thread | | | Date | Thu, 21 Mar 2002 11:06:53 -0800 | From | Andrew Burgess <> | Subject | 2.4.19pre4 preempt: BUG: kunmap while in_interrupt() |
| |
This occured a few minutes of booting, not sure what triggered it but the system is somewhat busy. Only happened once and the system seems fine WITHOUT a reboot.
This is my first try with pre4 AND my first try with the preemptive patches: preempt-kernel-rml-2.4.19-pre4-1.patch emu10k1-20020320-2.4.19-pre4-1.patch
Mar 21 10:37:22 athlon kernel: kernel BUG at /usr/src/linux-2.4.19-pre4-rml/include/asm/highmem.h:74! Mar 21 10:37:22 athlon kernel: invalid operand: 0000 Mar 21 10:37:22 athlon kernel: CPU: 1 Mar 21 10:37:22 athlon kernel: EIP: 0010:[file_read_actor+176/256] Not tainted Mar 21 10:37:22 athlon kernel: EIP: 0010:[<c0135b40>] Not tainted Mar 21 10:37:22 athlon kernel: EFLAGS: 00010282 Mar 21 10:37:22 athlon kernel: eax: 00000047 ebx: 00001000 ecx: ffffffb6 edx: 00000000 Mar 21 10:37:22 athlon kernel: esi: c4baf000 edi: 4001a000 ebp: c10e30c0 esp: ee00fedc Mar 21 10:37:22 athlon kernel: ds: 0018 es: 0018 ss: 0018 Mar 21 10:37:22 athlon kernel: Process x10 (pid: 9630, stackpage=ee00f000) Mar 21 10:37:22 athlon kernel: Stack: c02838c0 0000004a 00000000 00001000 efde42c4 c10e30c0 ea71d4d0 00000037 Mar 21 10:37:22 athlon kernel: c0135580 ee00ff5c c10e30c0 00000000 00001000 00001000 efde42c4 00000000 Mar 21 10:37:22 athlon kernel: 00000000 00000000 ea71d414 df00370c ca2d7d30 00030002 089b8000 00000000 Mar 21 10:37:22 athlon kernel: Call Trace: [do_generic_file_read+688/1504] [generic_file_read+122/288] [file_read_actor+0/256] [sys_read+149/512] [sys_brk+184/240] Mar 21 10:37:22 athlon kernel: Call Trace: [<c0135580>] [<c0135c0a>] [<c0135a90>] [<c0149515>] [<c0131608>] Mar 21 10:37:22 athlon kernel: [do_IRQ+412/544] [system_call+51/56] Mar 21 10:37:22 athlon kernel: [<c01095dc>] [<c01078cb>] Mar 21 10:37:22 athlon kernel: Mar 21 10:37:22 athlon kernel: Code: 0f 0b 5f 58 3b 2d b4 82 36 c0 72 07 89 e8 e8 ad 10 01 00 8b
The code is:
static inline void kunmap(struct page *page) { if (in_interrupt()) BUG(); if (page < highmem_start_page) return; kunmap_high(page); }
Other system info:
root@athlon:linux # sh scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux athlon 2.4.19-pre4-rml #3 SMP Thu Mar 21 09:34:07 PST 2002 i686 unknown Gnu C 2.96 Gnu make 3.79.1 binutils 2.11.90.0.8 util-linux 2.11f mount 2.11g modutils 2.4.13 e2fsprogs 1.26 reiserfsprogs 3.x.0f pcmcia-cs 3.1.22 PPP 2.4.0 isdn4k-utils 3.1pre1 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.57 Console-tools 0.3.3 Sh-utils 2.0 Modules Loaded snd-pcm-oss snd-mixer-oss snd-card-emu10k1 snd-emu10k1 snd-pcm snd-timer snd-util-mem snd-ac97-codec snd-rawmidi snd-hwdep snd-seq-device snd soundcore NVdriver ecc ipt_TOS iptable_mangle ipt_MASQUERADE iptable_nat ip_conntrack ipt_REJECT ipt_LOG iptable_filter ip_tables ncr53c8xx i2c-dev i2c-core parport_pc lp parport 8139too mii sd_mod md dsbr100 videodev usb-ohci usbcore
athlon:aab > cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(tm) Processor stepping : 1 cpu MHz : 1194.678 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 2385.51
processor : 1 vendor_id : AuthenticAMD cpu family : 6 model : 6 model name : AMD Athlon(tm) Processor stepping : 1 cpu MHz : 1194.678 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 2385.51
athlon:aab > cat /proc/modules snd-pcm-oss 39712 1 (autoclean) snd-mixer-oss 10112 1 (autoclean) [snd-pcm-oss] snd-card-emu10k1 2368 2 snd-emu10k1 62976 0 [snd-card-emu10k1] snd-pcm 62912 0 [snd-pcm-oss snd-emu10k1] snd-timer 13600 0 [snd-pcm] snd-util-mem 1984 0 [snd-emu10k1] snd-ac97-codec 24736 0 [snd-emu10k1] snd-rawmidi 15456 0 [snd-emu10k1] snd-hwdep 3872 0 [snd-emu10k1] snd-seq-device 4260 0 [snd-card-emu10k1 snd-rawmidi] snd 33416 0 [snd-pcm-oss snd-mixer-oss snd-card-emu10k1 snd-emu10k1 snd-pcm snd-timer snd-util-mem snd-ac97-codec snd-rawmidi snd-hwdep snd-seq-device] soundcore 5316 6 [snd] NVdriver 821984 0 (unused) ecc 13952 0 (unused) ipt_TOS 1440 5 (autoclean) iptable_mangle 2496 1 (autoclean) ipt_MASQUERADE 2528 0 (autoclean) iptable_nat 26132 0 (autoclean) [ipt_MASQUERADE] ip_conntrack 28652 1 (autoclean) [ipt_MASQUERADE iptable_nat] ipt_REJECT 3264 130 (autoclean) ipt_LOG 4032 279 (autoclean) iptable_filter 2080 1 (autoclean) ip_tables 14912 9 [ipt_TOS iptable_mangle ipt_MASQUERADE iptable_nat ipt_REJECT ipt_LOG iptable_filter] ncr53c8xx 54080 0 (unused) i2c-dev 3776 0 (unused) i2c-core 13856 0 [i2c-dev] parport_pc 15524 2 (autoclean) lp 7392 0 (autoclean) parport 28928 2 (autoclean) [parport_pc lp] 8139too 19808 1 (autoclean) mii 1520 0 (autoclean) [8139too] sd_mod 11548 4 (autoclean) md 45568 0 dsbr100 4544 1 videodev 6688 2 [dsbr100] usb-ohci 25152 0 (unused) usbcore 68288 1 [dsbr100 usb-ohci]
athlon:aab > cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 1000-10ff : LSI Logic / Symbios Logic (formerly NCR) 53c810 1000-107f : ncr53c8xx 1400-14ff : Realtek Semiconductor Co., Ltd. RTL-8139 1400-14ff : 8139too 1800-183f : Promise Technology, Inc. 20267 1800-1807 : ide2 1808-180f : ide3 1810-183f : PDC20267 1840-185f : Creative Labs SB Live! EMU10k1 1840-185f : EMU10K1 1860-187f : PCI device 1415:9501 (Oxford Semiconductor Ltd) 1880-189f : PCI device 1415:9501 (Oxford Semiconductor Ltd) 1880-1887 : serial(auto) 1888-188f : serial(auto) 1890-1897 : serial(auto) 1898-189f : serial(auto) 18a0-18bf : PCI device 1415:9513 (Oxford Semiconductor Ltd) 18d0-18df : 3ware Inc 3ware 7000-series ATA-RAID 18d0-18dc : 3ware Storage Controller 18e0-18e3 : PCI device 1022:700c (Advanced Micro Devices [AMD]) 18e4-18e7 : Promise Technology, Inc. 20267 18e6-18e6 : ide3 18e8-18ef : Promise Technology, Inc. 20267 18e8-18ef : ide3 18f0-18f3 : Promise Technology, Inc. 20267 18f2-18f2 : ide2 18f8-18ff : Promise Technology, Inc. 20267 18f8-18ff : ide2 1c00-1c07 : Creative Labs SB Live! 1c08-1c0f : PCI device 1415:9513 (Oxford Semiconductor Ltd) 1c10-1c17 : PCI device 1415:9513 (Oxford Semiconductor Ltd) 1c10-1c12 : parport1 f000-f00f : Advanced Micro Devices [AMD] AMD-765 [Viper] IDE f000-f007 : ide0 f008-f00f : ide1
athlon:aab > cat /proc/iomem 00000000-0009bfff : System RAM 0009c000-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000ca800-000cc7ff : Extension ROM 000cc800-000cd7ff : Extension ROM 000dc000-000dcfff : Advanced Micro Devices [AMD] AMD-765 [Viper] USB 000dc000-000dcfff : usb-ohci 000e0000-000effff : Extension ROM 000f0000-000fffff : System ROM 00100000-2ffeffff : System RAM 00100000-00275b8c : Kernel code 00275b8d-002f80df : Kernel data 2fff0000-2ffffbff : ACPI Tables 2ffffc00-2fffffff : ACPI Non-volatile Storage f4000000-f47fffff : 3ware Inc 3ware 7000-series ATA-RAID f4800000-f481ffff : Promise Technology, Inc. 20267 f4821000-f4821fff : PCI device 1415:9501 (Oxford Semiconductor Ltd) f4822000-f4822fff : PCI device 1415:9501 (Oxford Semiconductor Ltd) f4823000-f4823fff : PCI device 1415:9513 (Oxford Semiconductor Ltd) f4824000-f48240ff : LSI Logic / Symbios Logic (formerly NCR) 53c810 f4824400-f482440f : 3ware Inc 3ware 7000-series ATA-RAID f4824800-f48248ff : Realtek Semiconductor Co., Ltd. RTL-8139 f4824800-f48248ff : 8139too f4825000-f4825fff : PCI device 1022:700c (Advanced Micro Devices [AMD]) f5000000-f5ffffff : PCI Bus #01 f5000000-f5ffffff : nVidia Corporation Vanta [NV6] f8000000-fbffffff : PCI device 1022:700c (Advanced Micro Devices [AMD]) fc000000-fdffffff : PCI Bus #01 fc000000-fdffffff : nVidia Corporation Vanta [NV6] fec00000-fec0ffff : reserved fee00000-fee00fff : reserved fff80000-ffffffff : reserved
root@athlon:/root # lspci -vvv 00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700c (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at f4825000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at 18e0 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=15 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 700d (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f5000000-f5ffffff Prefetchable memory behind bridge: fc000000-fdffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-765 [Viper] ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-765 [Viper] IDE (rev 01) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-765 [Viper] ACPI (rev 01) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-765 [Viper] USB (rev 07) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (20000ns max) Interrupt: pin D routed to IRQ 11 Region 0: Memory at 000dc000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Non-VGA unclassified device: Symbios Logic Inc. (formerly NCR) 53c810 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1000 [size=256] Region 1: Memory at f4824000 (32-bit, non-prefetchable) [size=256]
00:09.0 Unknown mass storage controller: Promise Technology, Inc. 20267 (rev 02) Subsystem: Promise Technology, Inc.: Unknown device 4d33 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 18f8 [size=8] Region 1: I/O ports at 18f0 [size=4] Region 2: I/O ports at 18e8 [size=8] Region 3: I/O ports at 18e4 [size=4] Region 4: I/O ports at 1800 [size=64] Region 5: Memory at f4800000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [58] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 08) Subsystem: Creative Labs CT4832 SBLive! Value Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at 1840 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.1 Input device controller: Creative Labs SB Live! (rev 08) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0: I/O ports at 1c00 [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 RAID bus controller: 3ware Inc: Unknown device 1001 (rev 01) Subsystem: 3ware Inc: Unknown device 1001 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 72 (2250ns min), cache line size 10 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 18d0 [size=16] Region 1: Memory at f4824400 (32-bit, non-prefetchable) [size=16] Region 2: Memory at f4000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 Serial controller: Oxford Semiconductor Ltd: Unknown device 9501 (prog-if 06 [16950]) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1880 [size=32] Region 1: Memory at f4822000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1860 [size=32] Region 3: Memory at f4821000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.1 Parallel controller: Oxford Semiconductor Ltd: Unknown device 9513 (prog-if 01 [BiDir]) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 1c10 [size=8] Region 1: I/O ports at 1c08 [size=8] Region 2: I/O ports at 18a0 [size=32] Region 3: Memory at f4823000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at f4824800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:05.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at fc000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
root@athlon:linux # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: 3ware Model: 3w-xxxx Rev: 1.0 Type: Direct-Access ANSI SCSI revision: ffffffff Host: scsi0 Channel: 00 Id: 07 Lun: 00 Vendor: 3ware Model: 3w-xxxx Rev: 1.0 Type: Direct-Access ANSI SCSI revision: ffffffff Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: HP Model: C1537A Rev: L708 Type: Sequential-Access ANSI SCSI revision: 02
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |