Messages in this thread | | | From | Sönke Ruempler <> | Subject | reiserfs bug | Date | Thu, 28 Nov 2002 09:28:47 +0100 |
| |
kernel oops while writing through sbp2 to ieee1394 ide reiserfs-formated device
i am NOT on the list, pls CC me!
trace:
kernel BUG at prints.c:334! invalid operand: 0000 CPU: 0 EIP: 0010:[<c0174d69>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010282 eax: 00000024 ebx: c0259c00 ecx: cf51a000 edx: cf51bf64 esi: cc7f6c00 edi: ce2cb6c0 ebp: 00000003 esp: c12f1ea0 ds: 0018 es: 0018 ss: 0018 Process kupdated (pid: 7, stackpage=c12f1000) Stack: c024e755 c02e0120 c0259c00 c12f1ec4 d0923830 00000000 c017f13d cc7f6c00 c0259c00 00000000 00000014 ce2cb6c0 d093aaf4 c0131268 c023fa4d cb66a000 d0923000 00000013 00000010 00000004 c0182b4b cc7f6c00 d0923830 00000001 Call Trace: [<c017f13d>] [<c0131268>] [<c023fa4d>] [<c0182b4b>] [<c0181d40>] [<c0181d4e>] [<c01725d5>] [<c0133eee>] [<c01334bc>] [<c013374c>] [<c0105000>] [<c0105000>] [<c0106ff6>] [<c0133670>] Code: 0f 0b 4e 01 e2 0f 25 c0 85 f6 68 20 01 2e c0 74 0d 0f b7 46
>>EIP; c0174d69 <reiserfs_panic+29/60> <===== Trace; c017f13d <flush_commit_list+2bd/3b0> Trace; c0131268 <getblk+18/40> Trace; c023fa4d <_mmx_memcpy+4d/150> Trace; c0182b4b <do_journal_end+7eb/af0> Trace; c0181d40 <flush_old_commits+130/160> Trace; c0181d4e <flush_old_commits+13e/160> Trace; c01725d5 <reiserfs_write_super+15/20> Trace; c0133eee <sync_supers+be/e0> Trace; c01334bc <sync_old_buffers+c/40> Trace; c013374c <kupdate+dc/100> Trace; c0105000 <_stext+0/0> Trace; c0105000 <_stext+0/0> Trace; c0106ff6 <kernel_thread+26/30> Trace; c0133670 <kupdate+0/100> Code; c0174d69 <reiserfs_panic+29/60> 00000000 <_EIP>: Code; c0174d69 <reiserfs_panic+29/60> <===== 0: 0f 0b ud2a <===== Code; c0174d6b <reiserfs_panic+2b/60> 2: 4e dec %esi Code; c0174d6c <reiserfs_panic+2c/60> 3: 01 e2 add %esp,%edx Code; c0174d6e <reiserfs_panic+2e/60> 5: 0f 25 (bad) Code; c0174d70 <reiserfs_panic+30/60> 7: c0 85 f6 68 20 01 2e rolb $0x2e,0x12068f6(%ebp) Code; c0174d77 <reiserfs_panic+37/60> e: c0 (bad) Code; c0174d78 <reiserfs_panic+38/60> f: 74 0d je 1e <_EIP+0x1e> c0174d87 <reiserfs_panic+47/60> Code; c0174d7a <reiserfs_panic+3a/60> 11: 0f b7 46 00 movzwl 0x0(%esi),%eax
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux blah 2.4.19 #1 Die Aug 13 10:01:16 CEST 2002 i686 unknown
Gnu C 2.96 Gnu make 3.79.1 binutils 2.11.90.0.8 util-linux 2.11f mount 2.11g modutils 2.4.6 e2fsprogs 1.23 reiserfsprogs 3.x.0j isdn4k-utils 3.1pre1 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Console-tools 0.3.3 Sh-utils 2.0.11 Modules Loaded sbp2 smbfs nls_iso8859-1 isofs lp
Linux version 2.4.19 (root@blah) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Die Aug 13 10:01:16 CEST 2002
cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 3 model name : AMD Duron(tm) Processor stepping : 1 cpu MHz : 706.989 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow bogomips : 1409.02
modules: sbp2 15904 1 smbfs 32144 1 (autoclean) nls_iso8859-1 2832 0 (autoclean) isofs 17296 0 (autoclean) lp 5968 0 (autoclean)
ipports: 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0140-015f : aha152x 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 b000-bfff : PCI Bus #01 d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller da00-da1f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN da00-da1e : b1pci-da00 dc00-dc3f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN de00-deff : Macronix, Inc. [MXIC] MX987x5 de00-deff : tulip f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE f000-f007 : ide0 f008-f00f : ide1
iomem: 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-0024371c : Kernel code 0024371d-002978bf : Kernel data 0fff0000-0fff7fff : ACPI Tables 0fff8000-0fffffff : ACPI Non-volatile Storage e6c00000-e6cfffff : PCI Bus #01 e8000000-ebffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller eedff000-eedfffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller eee00000-eeefffff : PCI Bus #01 ef7e8000-ef7ebfff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) ef7ee000-ef7eefff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB ef7ef000-ef7ef7ff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) ef7ef000-ef7ef7ff : ohci1394 ef7efec0-ef7efeff : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN ef7eff00-ef7effff : Macronix, Inc. [MXIC] MX987x5 ef7eff00-ef7effff : tulip ef800000-efffffff : S3 Inc. 86c764/765 [Trio32/64/64V+] ffff0000-ffffffff : reserved
lspci -vvv: 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 120 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at eedff000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at d800 [disabled] [size=4] Capabilities: [a0] AGP version 1.0 Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: eee00000-eeefffff Prefetchable memory behind bridge: e6c00000-e6cfffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 07) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (20000ns max), cache line size 08 Interrupt: pin D routed to IRQ 12 Region 0: Memory at ef7ee000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 500ns max) Interrupt: pin A routed to IRQ 5 Region 0: Memory at ef7efec0 (32-bit, non-prefetchable) [size=64] Region 1: I/O ports at dc00 [size=64] Region 2: I/O ports at da00 [size=32]
00:09.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020 (prog-if 10 [OHCI]) Subsystem: Texas Instruments: Unknown device 8010 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (750ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at ef7ef000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at ef7e8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 20) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at de00 [size=256] Region 1: Memory at ef7eff00 (32-bit, non-prefetchable) [size=256] Expansion ROM at ef7d0000 [disabled] [size=64K] Capabilities: [44] Power Management version 1 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot-,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 12 Region 0: Memory at ef800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at ef7f0000 [disabled] [size=64K]
have fun! [unhandled content-type:application/x-pkcs7-signature] | |