Messages in this thread | | | Date | Thu, 17 Jan 2002 10:58:00 +0300 | From | Andrey Nekrasov <> | Subject | "SCSI storage controller: Adaptec 7896" |
| |
Hello.
1. hardware - m/b Intel L440GX 2. software - 2.4.18pre2aa2
... SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 8000002 Current sd08:41: sense key Aborted Command Additional sense indicates Scsi parity error I/O error: dev 08:41, sector 1776600 raid1: Disk failure on sde1, disabling device. Operation continuing on 1 devices md: recovery thread got woken up ... md2: no spare disk to reconstruct array! -- continuing in degraded mode md: recovery thread finished ...
3.
@samson:/proc/scsi$ cat scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DDYS-T36950M Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: IBM Model: DDYS-T36950M Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: IBM Model: DDYS-T36950M Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: IBM Model: DDYS-T18350M Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DNES-318350W Rev: SAH0 Type: Direct-Access ANSI SCSI revision: 03 @samson:/proc/scsi$
4.
This is error disk or scsi cable? Way not repeat try I/O ?
-- bye. Andrey Nekrasov, SpyLOG. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |