Messages in this thread | | | Date | Mon, 14 Jan 2002 18:12:10 +0100 | From | Stephan von Krawczynski <> | Subject | Memory problem with bttv driver |
| |
Hello,
yesterday we came across another MM related problem. This time its related to the bttv-driver. We do very simple things:
First load it:
# modprobe bttv Jan 14 17:28:14 fred kernel: bttv: driver version 0.7.83 loaded Jan 14 17:28:14 fred kernel: bttv: using 2 buffers with 2080k (4160k total) for capture Jan 14 17:28:14 fred kernel: bttv: Host bridge is VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] Jan 14 17:28:14 fred kernel: bttv: Host bridge is VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] Jan 14 17:28:14 fred kernel: bttv: Bt8xx card found (0). Jan 14 17:28:14 fred kernel: bttv0: Bt848 (rev 18) at 00:0c.0, irq: 16, latency: 32, memory: 0xef000000 Jan 14 17:28:14 fred kernel: bttv0: using: BT848A( *** UNKNOWN/GENERIC **) [card=0,autodetected] Jan 14 17:28:14 fred kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0. Jan 14 17:28:14 fred kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Jan 14 17:28:14 fred kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jan 14 17:28:14 fred kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found Jan 14 17:28:14 fred kernel: i2c-core.o: driver i2c TV tuner driver registered. Jan 14 17:28:14 fred kernel: tuner: chip found @ 0xc2 Jan 14 17:28:14 fred kernel: bttv0: i2c attach [client=(unset),ok] Jan 14 17:28:14 fred kernel: i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 0).
Then try to use it:
# xawtv Jan 14 17:46:53 fred kernel: bttv: vmalloc_32(4259840) failed
... and exit of course.
Uh? Interesting about it: Does not work with 2.4.17 nor 2.4.18-pre3, but does work with 2.4.10-SUSE. (Same setup, only booting another kernel)
Any hints?
Regards, Stephan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |