Messages in this thread | | | Date | Tue, 3 Apr 2001 14:52:19 +0200 | From | Jörn Engel <> | Subject | Bugreport: Kernel 2.4.x crash |
| |
1. Kernel crash w/out error message or logfile entry
2. A Fileserver with an ABIT Hotrod 66 (htp366) controller will crash within 5-60 minutes after boot with a 2.4.x kernel. 2.2.x works fine. No other exotic hardware. Another possibility might be Reiserfs, which I use for all partitions except /. I have no experience with kernel debugging, but so far, I have found no log entry giving me a hint and the screen is blank after the crash. There might have been some output before, but the machine is in the basement and too important for excessive testing. I have tried 2.4.2 and 2.4.3 once each.
3. ide, hpt366
4. 2.4.2, 2.4.3
5. -
6. -
7. All this information is taken from the running 2.2.18 Kernel.
7.1. sh /usr/src/linux/scripts/ver_linux -- Versions installed: (if some fields are empty or look -- unusual then possibly you have very old versions) Linux belfast 2.2.18 #1 Fri Feb 23 14:47:14 CET 2001 i586 unknown Kernel modules 2.4.2 Gnu C 2.95.3 Gnu Make 3.79.1 Binutils 2.11.90.0.1 Linux C Library 2.2.2 Dynamic linker ldd (GNU libc) 2.2.2 Procps 2.0.7 Mount 2.11b Net-tools 2.05 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded sb uart401 sound soundcore
7.2. cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 5 model : 4 model name : Pentium MMX stepping : 3 cpu MHz : 200.459 fdiv_bug : no hlt_bug : no sep_bug : no f00f_bug : yes coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 mmx bogomips : 399.76
7.3 cat /var/log/ksymoops/20010401164317.modules (2.4.3) sb 2128 0 (unused) sb_lib 33936 0 [sb] uart401 6352 0 [sb_lib] sound 56400 0 [sb_lib uart401] soundcore 3792 5 [sb_lib sound] raid1 12784 0 (unused) raid0 3520 0 (unused) md 41056 0 [raid1 raid0]
7.4. cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 0220-022f : soundblaster 02f8-02ff : serial(set) 0330-0333 : MPU-401 UART 03c0-03df : vga+ 03e8-03ef : serial(auto) 03f6-03f6 : ide0 03f8-03ff : serial(set) 6100-6107 : ide2 6202-6202 : ide2 6400-6407 : ide3 6502-6502 : ide3 6700-677f : eth0 f000-f007 : ide0 f008-f00f : ide1
7.5 lspci -vvv 00:00.0 Host bridge: Intel Corporation 430HX - 82439HX TXC [Triton II] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32
00:07.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at f000
00:08.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 6100 Region 1: I/O ports at 6200 Region 4: I/O ports at 6300
00:08.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 6400 Region 1: I/O ports at 6500 Region 4: I/O ports at 6600
00:0a.0 VGA compatible controller: S3 Inc. Trio 64V2/DX or /GX (rev 16) (prog-if 00 [VGA]) Subsystem: Elsa AG: Unknown device 0935 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: Memory at e0000000 (32-bit, non-prefetchable)
00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 6700 Region 1: Memory at e4000000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable+ DSel=0 DScale=2 PME- 7.6. No SCSI
7.7. -
-- When your language is nowhere near Turing-complete, syntactic sugar can be your friend. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |