lkml.org 
[lkml]   [2001]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] drivers/net/at1700.c: missing __init and __initdata
Hi all,

this patch (2.4.3-ac7) adds some missing __init and __initdata
into at1700.c NIC driver.

Best regards.

--
Andrey Panin | Embedded systems software engineer
pazke@orbita1.ru | PGP key: http://www.orbita1.ru/~pazke/AndreyPanin.ascdiff -ur linux.vanilla/drivers/net/at1700.c linux/drivers/net/at1700.c
--- linux.vanilla/drivers/net/at1700.c Tue Apr 17 10:54:07 2001
+++ linux/drivers/net/at1700.c Tue Apr 17 11:17:37 2001
@@ -70,7 +70,7 @@

/* These unusual address orders are used to verify the CONFIG register. */

-static int fmv18x_probe_list[] = {
+static int fmv18x_probe_list[] __initdata = {
0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
};

@@ -78,7 +78,7 @@
* ISA
*/

-static int at1700_probe_list[] = {
+static int at1700_probe_list[] __initdata = {
0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
};

@@ -86,15 +86,15 @@
* MCA
*/
#ifdef CONFIG_MCA
-static int at1700_ioaddr_pattern[] = {
+static int at1700_ioaddr_pattern[] __initdata = {
0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07
};

-static int at1700_mca_probe_list[] = {
+static int at1700_mca_probe_list[] __initdata = {
0x400, 0x1400, 0x2400, 0x3400, 0x4400, 0x5400, 0x6400, 0x7400, 0
};

-static int at1700_irq_pattern[] = {
+static int at1700_irq_pattern[] __initdata = {
0x00, 0x00, 0x00, 0x30, 0x70, 0xb0, 0x00, 0x00,
0x00, 0xf0, 0x34, 0x74, 0xb4, 0x00, 0x00, 0xf4, 0x00
};
@@ -175,10 +175,10 @@
};
/* rEnE : maybe there are others I don't know off... */

-static struct at1720_mca_adapters_struct at1720_mca_adapters[] = {
+static struct at1720_mca_adapters_struct at1720_mca_adapters[] __initdata = {
{ "Allied Telesys AT1720AT", 0x6410 },
{ "Allied Telesys AT1720BT", 0x6413 },
- { "Allied Telesys AT1720T", 0x6416 },
+ { "Allied Telesys AT1720T", 0x6416 },
{ NULL, 0 },
};
#endif
@@ -470,7 +470,7 @@
#define EE_READ_CMD (6 << 6)
#define EE_ERASE_CMD (7 << 6)

-static int read_eeprom(int ioaddr, int location)
+static int __init read_eeprom(int ioaddr, int location)
{
int i;
unsigned short retval = 0;[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 13:26    [W:0.025 / U:4.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site