lkml.org 
[lkml]   [2001]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Matrox G400 Dualhead
Date
> I have a similar problem with my G450, booting into the framebuffer,
> then loading xdm and working in X, and then switching back to the
> console. I may have another detail to add in that when I switch back
> to the console from X, my monitor blanks and displays the warning
> that the frequencies are out of range.

I think I have a work around. Boot up 2.4.3 with the framebuffer
enabled as normal. Log in as root and use the fbset program to change
the settings for all the framebuffers.
eg.

fbset -a 1024x768-70

or whatever works for you. fbset has its own man page.

This makes everything hunky-dory for me, in that after running fbset
I
can go in and out of X without ever losing the video signal.

Petr, I had a look at the drivers/video/matrox subdir and there's no
difference between 2.4.2 and 2.4.3, however there are differences in
the drivers/video dir to do with framebuffers. The files that have
been changed in drivers/video/ are:
creatorfb.c
fbmem.c
fonts.c
modedb.c
sbus.c

I know nothing about the nature of the changes that have been made
though!

It does seem to be a kernel problem rather than a X4.0.3 problem
seeing as how 4.0.3 works fine under 2.4.2, and that using fbset on
the framebuffer console in 2.4.3 solves the problem.

John
----------------
jbk@postmark.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:17    [W:0.049 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site