lkml.org 
[lkml]   [2000]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectSCSI adapter problems
I have to SCSI adapters installed in my ix86 machine; Adaptec 
AHA-2940A Ultra SCSI and DPT PM2144UW. Both have two units each
(respectively: disk and zip; tape and cdrom).

For the 2.2.14 kernel I have some problem in automatically loading
the aic7xxx module. I have to do a 'insmod aic7xxx' manually. The
eata module loads fine.

/etc/conf.modules:
alias scsi_hostadapter eata
alias scsi_hostadapter1 aic7xxx
alias scsi_hostadapter2 aic7xxx

Changing this order will hang the machine - the eata module MUST
be loaded first. However, this is not a major problem as I can always
add this somewhere in the rc-files.

On 2.2.15, 2.2.16 and 2.4.0-test1 & 2 the eata module also fails
to be loaded automatically. However, if I compile it in it works
as before.

These problems appears to be related. Should it be like this?

Regards,
-Frode


--
^ Frode Tennebø | email: ft@edh.ericsson.se ^
| Ericsson Radar AS. | Isebakkeveien 49 |
| N-1788 Halden | Phone: +47 69 21 41 47 |
| with Standard.Disclaimer; use Standard.Disclaimer; |

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.041 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site