lkml.org 
[lkml]   [2000]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectAIC7xxx, v5.1.28 is broken ...(in 15pre14)
Adaptec 7890 with Western Digital:
Model: WDIGTL Model: WDE18310 ULTRA2 Rev: 1.30

It works with 2 other drive types, but not the WD.

It *DID* work in 5.1.20 (still does if I put the old driver in the
new kernel). Note that it broke with 5.1.21 when alot of changes
were made for 7890's.

This affects *two* different systems, each with a 7890 and each with
a WD as a 2nd or third drive. So it is not just 1 bad drive or 1 bad
controller. System is a Dell 410 that has the 7890 on the motherboard
with a Dell bios.

Symptom: Continual SCSI timeouts and resets when trying to mkfs
the drive (1 big
partition). System effectively hangs -- entire SCSI bus is
locked up even for the drives that work. Basically, I do
a 'umount -a' in single user before running this "test".


--
Linda A Walsh | Trust Technology, Core Linux, SGI
law@sgi.com | Voice: (650) 933-5338

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.019 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site