lkml.org 
[lkml]   [1999]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Linux 2.3.18ac7
Date
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

it did see the card but can't initialize it.

now the senario;
on 2.3.18 --- > only checksum error during boot but network access
was ok
on 2.3.18ac series before donald's 0.99M 3c59x.c -- > only checksum
error during boot but network access was ok
on 2.3.18ac7 --> checksum error and card cannot be initialize
on 2.3.18ac8 --> card can be initialize but no network ( forget to
watch for the checksum error )

an ifconfig shows that the interface is up and it can't access
network

I really do not know why ....

- ----- Original Message -----
From: Colin Bradford <colin@firelite.demon.co.uk>
To: Peter Goh <petergoh@magix.com.sg>
Sent: Tuesday, September 21, 1999 10:43 PM
Subject: Re: Linux 2.3.18ac7


> On Tue, 21 Sep 1999, Peter Goh wrote:
>
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > What I faced was the integrated 3C905C on dell computer.
> > it was ok before the 0.99M of the 3c59x.c
> >
> > I replace it with the 0.99L currently.
> >
> Are you sure that Linux is not seeing the card? I have some Dells
> with the 3c905C, and they won't see a Netgear switch. They will,
> however, see a Netgear Hub.
>
> Cheers,
>
> Colin.

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.1 for non-commercial use <http://www.pgp.com>

iQA/AwUBN+g+dKxm4FeZfGJyEQIhsQCdF8d9AplJp5+AfIvWOasYS7L1AXcAn003
Valj81ImNB1Wnp8HVfflW4cO
=J6Dv
-----END PGP SIGNATURE-----



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:54    [W:0.033 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site