lkml.org 
[lkml]   [1999]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectSCSI NCR53C810 isn't detected by 2.3.18
Hi!

My Chip NCR53C810 (device id 0x1, revision id 0x1) isn't detected by
2.3.18 (neither vanilla, nor ac4). All I get on bootup is
scsi : 0 host.
scsi : detected total.
right after the md says 'md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8'.

I tried NCR53C8XX SCSI support (drivers/scsi/53c*, CONFIG_SCSI_NCR53C8XX=y)
and (but not in the same kernel!) NCR53c7,8xx SCSI support
(drivers/scsi/ncr53c8xx.*, CONFIG_SCSI_NCR53C7xx=y), which didn't
change anything, so I guess the problem isn't buried in those drivers.

I didn't try any 2.3.*-Kernel before, but it works with a 2.2.12,
using the NCR53C8XX SCSI support.

Any ideas?

--
marko schulz

"Alles hat man herausgefunden, nur nicht, wie man lebt"
Jean Paul Sartre

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:54    [W:0.338 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site