Messages in this thread | | | From | "Stuart Inglis" <> | Subject | Upgraded from 2.2.5 (RH6) to 2.3.18---ATAPI CD-ROM freezes machine while booting | Date | Mon, 13 Sep 1999 09:39:19 +1200 |
| |
Hi all,
I'm trying to get the 2.3.18 kernel running on a Dell P90 machine. It has a NCR SCSI bus+HD and a ATAPI CD-ROM. I'm using the same .config that comes with RH6.
When booting 2.2.5 I get...
. . . Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS02 at 0x03e8 (irq = 4) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size hda: GCD-R542B, ATAPI CDROM drive hdb: no response (status = 0xff) hdb: non-IDE drive, CHS=0/0/0 ide2: ports already in use, skipping probe ide0: unexpected interrupt, status=0x10, count=1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdb: INVALID GEOMETRY: 0 PHYSICAL HEADS? hda: ATAPI 4X CD-ROM drive, 256kB Cache Uniform CDROM driver Revision: 2.54 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed 8regs : 93.726 MB/sec 32regs : 80.391 MB/sec using fastest function: 8regs (93.726 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: RAMDISK: Compressed image found at block 0 autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem). ncr53c8xx: at PCI bus 0, device 15, function 0 ncr53c8xx: 53c810 detected ncr53c810-0: rev=0x02, base=0x3efeff00, io_port=0xfd00, irq=11 ncr53c810-0: ID 7, Fast-10, Parity Checking ncr53c810-0: restart (scsi reset). scsi0 : ncr53c8xx - revision 3.1h scsi : 1 host. Vendor: SEAGATE Model: ST31230N Rev: 0510 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 ncr53c810-0-<0,0>: tagged command queue depth set to 8 ncr53c810-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) SCSI device sda: hdwr sector= 512 bytes. Sectors= 2069860 [1010 MB] [1.0 GB] sda: sda1 sda2 < sda5 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 68k freed (and we're away)
***
while 2.3.18 only gets to...
. . . RAM disk driver initialized: 16 RAM disks of 4096K size hda: GCD-R542B, ATAPI CDROM drive hdb: no response (status = 0xff) hdb: non-IDE drive, CHS=0/0/0 ide2: ports already in use, skipping probe ide0: unexpected interrupt, status=0x10, count=1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdb: INVALID GEOMETRY: 0 PHYSICAL HEADS? hda: cdrom_pc_intr: The drive appears confused (ireason = 0x 1)
(freeze)
Any ideas?
cheers Stuart
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |