lkml.org 
[lkml]   [1999]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[Q] ide probe and 2.3.18
Date
Just got my machine past 2.3.12 to 2.3.18, and noticed the following
during boot/log:


Uniform Multi-Platform E-IDE driver Revision: 6.20
hda: ST3550A, ATA DISK drive
hdb: WDC AC31200F, ATA DISK drive
hdc: ST51080A, ATA DISK drive
hdd: WDC AC2420H, ATA DISK drive
ide2: ports already in use, skipping probe
ide6: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST3550A, 431MB w/256kB Cache, CHS=1018/14/62
hdb: WDC AC31200F, 1222MB w/64kB Cache, CHS=2484/16/63
hdc: ST51080A, 1033MB w/256kB Cache, CHS=2100/16/63
hdd: WDC AC2420H, 405MB w/128kB Cache, CHS=989/15/56
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M

Also had 10 messages on screen:
Request_module[ide-probe]: Root fs not mounted

Question: Is ide6 a valid number, and if so, what about 3,4, and 5?

System is i486 and has no pci bus (none configured).
All ide configured in (no modules).

--
Pete Clements
clem@clem.digital.net

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.165 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site