lkml.org 
[lkml]   [1999]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[2.3.15-2] pppd 2.3.9 not redialing with 'demand'?
	Hi, I have pppd working with 2.3.15 on a UP PPro.  The 'demand' option
seems to work, because pppd successfully detects internet activity and
dials. However, after it disconnects (due to inactivity) it will not
redial.
The inability to redial seems to be becuase pppd simply doesn't notice
any activity on the link. It doesn't respond on any way after it first
disconnects, even if debug and kdebug are turned on. Here are my
options: I've twiddled everything, and still pppd work fine but notices
no packets after it hangs up the modem.
THanks for any help,
-BenRI

telomere:/etc/ppp/peers> cat provider
# Options for Demand Dialing
10.0.0.1:10.0.0.2
ipcp-accept-local # Let peer override local IP Address
ipcp-accept-remote # Let peer override remote IP Address
defaultroute # Use this route for IP traffic
demand # demand-dialing
idle 120 # Break the link after 2 minutes idle

noauth
/dev/modem 115200

connect "/usr/sbin/chat -v -f /etc/chatscripts/provider"

--
"This isn't right. This isn't even wrong." -- Wolfgang Pauli
Benjamin Redelings I <>< http://www.bol.ucla.edu/~bredelin

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.027 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site