lkml.org 
[lkml]   [1999]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.3.13/14 no boot on i486 cause identified
Date
fyi:  My i486 fails to boot 2.3.13/14 (last boot was pre-2.3.13-1)

I have a bad design 486 board which goes to slow operation
above 32M ram (have 36M, 4M soldered on board and 32M SIMM in the
single slot) so use lilo mem=32M directive. On a hunch I removed
the mem=32M directive and pre-2.3.14-2 successfully boots (course
the performance is degraded by a factor of 4 due to the extra
memory).

In short, I assume that lilo and the kernel are not on the same
sheet of music (LILO version 21).
--
Pete Clements
clem@clem.digital.net

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.152 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site