lkml.org 
[lkml]   [1999]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectoops on 2.3.13-8
I received the attached oops with the new kernel. This is my first time
with ksymoops, so I hope I did it correctly. System is a dual processor
xeon, ASUS XG_DLS main board with on board scsi and Intel 82558 ethernet
chip. the rest is pretty much Redhat 6.0

Partition check:
sda: sda1 sda2 sda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 80k freed
Oops: 0000
CPU: 0
EIP: 0010:[<c01c72cb>]
EFLAGS: 00010202
eax: 048b2824 ebx: 00000000 ecx: 00000000 edx: df24fe4c
esi: c0081800 edi: 0001a000 ebp: c0081c80 esp: df24fdd8
ds: 0018 es: 0018 ss: 0018
Process ifconfig (pid: 235, stackpage=df24f000)
Stack: 00000000 00000005 e0004000 00000000 00002050 00000014 e0004000
c025bfa0
c010b078 00000005 c025bfa0 df24fe4c 00000050 c0b6a920 00000005
df24fe44
c01101fa 00000005 df24fe4c c0b6a920 df24fe4c 00000278 e0004000
c010b1e3
Call Trace: [<e0004000>] [<e0004000>] [<c010b078>] [<c01101fa>]
[<e0004000>] [<c010b1e3>] [<c0109218>]
[<e0004010>] [<e0004000>] [<e0004010>] [<e0000018>] [<c01c66da>]
[<c01c68f4>] [<e0004000>] [<c016c30d>]
[<c016cfa8>] [<c0186c16>] [<c016d51f>] [<c018838c>] [<c0168585>]
[<c0136c51>] [<c010917c>]
Code: 8b 40 5c 01 86 bc 05 00 00 8b 14 2b f0 ff 4a 70 0f 94 c0 84


don

--
-------------------------------------------------------------------
| Don Fisher dfisher@as.arizona.edu |
| MMT Observatory VOICE: (520)621-7647 |
| University of Arizona FAX: (520)670-5740 |
| Tucson, AZ 85721 |
-------------------------------------------------------------------ksymoops -v /usr/src/linux-2.3.12/vmlinux -K -m /usr/src/linux-2.3.12/System.map crash.txt
ksymoops 0.7c on i686 2.2.11. Options used
-v /usr/src/linux-2.3.12/vmlinux (specified)
-K (specified)
-l /proc/modules (default)
-o /lib/modules/2.2.11/ (default)
-m /usr/src/linux-2.3.12/System.map (specified)

No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Oops: 0000
CPU: 0
EIP: 0010:[<c01c72cb>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: 048b2824 ebx: 00000000 ecx: 00000000 edx: df24fe4c
esi: c0081800 edi: 0001a000 ebp: c0081c80 esp: df24fdd8
ds: 0018 es: 0018 ss: 0018
Process ifconfig (pid: 235, stackpage=df24f000)
Stack: 00000000 00000005 e0004000 00000000 00002050 00000014 e0004000 c025bfa0
c010b078 00000005 c025bfa0 df24fe4c 00000050 c0b6a920 00000005 df24fe44
c01101fa 00000005 df24fe4c c0b6a920 df24fe4c 00000278 e0004000 c010b1e3
Call Trace: [<e0004000>] [<e0004000>] [<c010b078>] [<c01101fa>] [<e0004000>] [<c010b1e3>] [<c0109218>]
[<e0004010>] [<e0004000>] [<e0004010>] [<e0000018>] [<c01c66da>] [<c01c68f4>] [<e0004000>] [<c016c30d>]
[<c016cfa8>] [<c0186c16>] [<c016d51f>] [<c018838c>] [<c0168585>] [<c0136c51>] [<c010917c>]
Code: 8b 40 5c 01 86 bc 05 00 00 8b 14 2b f0 ff 4a 70 0f 94 c0 84

>>EIP; c01c72cb <speedo_interrupt+1e3/35c> <=====
Trace; e0004000 <END_OF_CODE+1fd48df0/????>
Trace; e0004000 <END_OF_CODE+1fd48df0/????>
Trace; c010b078 <handle_IRQ_event+50/80>
Trace; c01101fa <do_level_ioapic_IRQ+62/a8>
Trace; e0004000 <END_OF_CODE+1fd48df0/????>
Trace; c010b1e3 <do_IRQ+3b/58>
Trace; c0109218 <ret_from_intr+0/20>
Trace; e0004010 <END_OF_CODE+1fd48e00/????>
Trace; e0004000 <END_OF_CODE+1fd48df0/????>
Trace; e0004010 <END_OF_CODE+1fd48e00/????>
Trace; e0000018 <END_OF_CODE+1fd44e08/????>
Trace; c01c66da <mdio_read+3e/5c>
Trace; c01c68f4 <speedo_open+19c/1a8>
Trace; e0004000 <END_OF_CODE+1fd48df0/????>
Trace; c016c30d <dev_open+25/7c>
Trace; c016cfa8 <dev_change_flags+54/110>
Trace; c0186c16 <devinet_ioctl+22e/510>
Trace; c016d51f <dev_ioctl+17b/2cc>
Trace; c018838c <inet_ioctl+138/17c>
Trace; c0168585 <sock_ioctl+1d/24>
Trace; c0136c51 <sys_ioctl+1e1/240>
Trace; c010917c <system_call+34/38>
Code; c01c72cb <speedo_interrupt+1e3/35c>
00000000 <_EIP>:
Code; c01c72cb <speedo_interrupt+1e3/35c> <=====
0: 8b 40 5c movl 0x5c(%eax),%eax <=====
Code; c01c72ce <speedo_interrupt+1e6/35c>
3: 01 86 bc 05 00 00 addl %eax,0x5bc(%esi)
Code; c01c72d4 <speedo_interrupt+1ec/35c>
9: 8b 14 2b movl (%ebx,%ebp,1),%edx
Code; c01c72d7 <speedo_interrupt+1ef/35c>
c: f0 ff 4a 70 lock decl 0x70(%edx)
Code; c01c72db <speedo_interrupt+1f3/35c>
10: 0f 94 c0 sete %al
Code; c01c72de <speedo_interrupt+1f6/35c>
13: 84 00 testb %al,(%eax)

1.980u 0.130s 0:02.03 103.9% 0+0k 0+0io 700pf+0w
\
 
 \ /
  Last update: 2005-03-22 13:53    [W:0.085 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site