Messages in this thread | | | Date | Sun, 04 Jul 1999 20:39:22 -0300 | From | Robson Miranda <> | Subject | I can't burn CDs anymore! |
| |
Hi,
I'm having a litte trouble with >=2.2.5 kernels, AIC-7xxx driver and my Sony CD-R model CDU-926S revision 1.1e. Since I upgraded to 2.2.5 and up, the only way I can boot is disabling Disconnect/Reconnect for the CD-R, in Adaptec's SCSI bios (I have one AHA-2940 and one AHA-2940UW, the CD-R is connected in AHA-2940, scsi ID 6). If I boot with disconnect/reconnect enabled, with kernel >=2.2.5 (the first I tested, tried with 2.2.5, 2.2.6, 2.2.7, 2.2.8, 2.2.9 and 2.2.10), then the following messages occur:
(scsi1:0:6:0) No active SCB for reconnecting target. Issuing BUS_DEVICE_RESET. (scsi1:0:6:0) SAVED_TCL=0x60, ARG_1=0xff, SEQADDR=0xfc.
When I tried to burn a CD with kernel 2.2.10 with Disconnect/Reconnect disabled, I noticed that the activity led of the SCSI board always on, the buffer of cdrecord runs out, and I got an underrun.. :( To track down the problem, I booted an old 2.0.36 kernel, and, with the same setup (disconnect/reconnect disabled), I got the same problem (this way, I was using dummy writes - didn't want to lost another media). Then, I enabled disconnect/reconnect for the CD-R, in bios, and the problem got away.
One time, I tried to copy the 2.0.36 aic7xxx driver (aic7xxx*.[ch] and aic7xxx directory) to a fresh 2.2.5 kernel, and I got the same results.
There is anything I can do to start to find the problem?
TIA, Robson
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |