Messages in this thread | | | Date | Tue, 13 Jul 1999 22:18:19 -0500 | From | Paul Fulghum <> | Subject | 2.2.10-ac8, Bad slab magic (corrupt) (name=buffer_head) |
| |
I got the following on the serial console when stress testing the disk on 2.2.10-ac8 with Bonnie. No other programs were active and there was no network traffic. After this message the machine was locked up hard and had to be reset.
kmem_alloc: Bad slab magic (corrupt) (name=buffer_head) Unable to handle kernel paging request at virtual address 57565564 current->tss.cr3 = 0151d000, %cr3 = 0151d000 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<c0123ee1>] EFLAGS: 00010046 eax: 57565554 ebx: c3c758fc ecx: c0fabfc0 edx: 57565554 esi: c009e740 edi: c3c75fc0 ebp: c3c758a0 esp: c2811df4 ds: 0018 es: 0018 ss: 0018 Process Bonnie (pid: 1420, process nr: 56, stackpage=c2811000) Stack: 00000001 00000400 a5c32f2b 00000282 00000246 c012a9a9 c009e740 c3c758a0 c3c75600 00000001 c012a9ef c3c758a0 c03cb5c0 00000001 c012aab6 00000001 00000400 00000817 00015cc4 c67a9ed0 c2811e50 c2811e50 c2810000 c2810000 Call Trace: [<c012a9a9>] [<c012a9ef>] [<c012aab6>] [<c012ae49>] [<c012a6cb>] [<c01433c0>] [<c012b221>] [<c011fa49>] [<c011fe8e>] [<c012024b>] [<c0120198>] [<c0128b92>] [<c010922c>] [<c010002b>] Code: 89 78 10 89 3e e9 58 ff ff ff 90 f0 0f ba 76 20 00 ff 74 24
c012a9a9 c012a988 t put_unused_buffer_head c012a9ef c012a9d4 t get_unused_buffer_head c012aab6 c012aa74 t create_buffers c012ae49 c012adc4 T brw_page c012a6cb c012a6b8 T __brelse c01433c0 c0143188 T ext2_bmap c012b221 c012b1a0 T generic_readpage c011fa49 c011f93c t try_to_read_ahead c011fe8e c011fb94 t do_generic_file_read c012024b c01201e8 T generic_file_read c0120198 c0120198 t file_read_actor c0128b92 c0128ad0 T sys_read c010922c c01091f8 T system_call c010002b c0100000 t startup_32
syslog info:
Jul 13 21:50:59 p6 syslogd 1.3-3: restart. Jul 13 21:50:59 p6 syslog: syslogd startup succeeded Jul 13 21:50:59 p6 kernel: klogd 1.3-3, log source = /proc/kmsg started. Jul 13 21:50:59 p6 kernel: Inspecting /boot/System.map-2.2.10-ac8 Jul 13 21:50:59 p6 syslog: klogd startup succeeded Jul 13 21:50:59 p6 kernel: Loaded 7498 symbols from /boot/System.map-2.2.10-ac8. Jul 13 21:50:59 p6 kernel: Symbols match kernel version 2.2.10. Jul 13 21:50:59 p6 kernel: Loaded 2 symbols from 3 modules. Jul 13 21:50:59 p6 kernel: Linux version 2.2.10-ac8 (root@p6.pipehead.org) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #7 SMP Sat Jul 10 13:18:47 CDT 1999 Jul 13 21:50:59 p6 kernel: Intel MultiProcessor Specification v1.1 Jul 13 21:50:59 p6 kernel: Virtual Wire compatibility mode. Jul 13 21:50:59 p6 kernel: OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000 Jul 13 21:50:59 p6 kernel: Processor #0 Pentium(tm) Pro APIC version 17 Jul 13 21:50:59 p6 kernel: Processor #1 Pentium(tm) Pro APIC version 17 Jul 13 21:50:59 p6 kernel: I/O APIC #2 Version 17 at 0xFEC00000. Jul 13 21:50:59 p6 kernel: Processors: 2 Jul 13 21:50:59 p6 kernel: mapped APIC to ffffe000 (fee00000) Jul 13 21:50:59 p6 kernel: mapped IOAPIC to ffffd000 (fec00000) Jul 13 21:50:59 p6 kernel: Detected 400917748 Hz processor. Jul 13 21:50:59 p6 kernel: Console: colour VGA+ 80x25 Jul 13 21:50:59 p6 kernel: Calibrating delay loop... 399.77 BogoMIPS Jul 13 21:50:59 p6 kernel: Memory: 127816k/131072k available (1208k kernel code, 420k reserved, 1580k data, 48k init) Jul 13 21:50:59 p6 kernel: VFS: Diskquotas version dquot_6.4.0 initialized Jul 13 21:50:59 p6 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Jul 13 21:50:59 p6 kernel: Checking 'hlt' instruction... OK. Jul 13 21:50:59 p6 kernel: POSIX conformance testing by UNIFIX Jul 13 21:50:59 p6 kernel: mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au) Jul 13 21:50:59 p6 kernel: per-CPU timeslice cutoff: 100.22 usecs. Jul 13 21:50:59 p6 kernel: CPU0: Intel Pentium II (Deschutes) stepping 01 Jul 13 21:50:59 p6 kernel: calibrating APIC timer ... Jul 13 21:50:59 p6 kernel: ..... CPU clock speed is 400.9187 MHz. Jul 13 21:50:59 p6 kernel: ..... system bus clock speed is 100.2294 MHz. Jul 13 21:50:59 p6 kernel: Booting processor 1 eip 2000 Jul 13 21:50:59 p6 kernel: Calibrating delay loop... 400.59 BogoMIPS Jul 13 21:50:59 p6 kernel: OK. Jul 13 21:50:59 p6 atd: atd startup succeeded Jul 13 21:50:59 p6 kernel: CPU1: Intel Pentium II (Deschutes) stepping 01 Jul 13 21:50:59 p6 kernel: Total of 2 processors activated (800.36 BogoMIPS). Jul 13 21:50:59 p6 kernel: enabling symmetric IO mode... ...done. Jul 13 21:50:59 p6 kernel: ENABLING IO-APIC IRQs Jul 13 21:50:59 p6 kernel: init IO_APIC IRQs Jul 13 21:50:59 p6 kernel: IO-APIC pin 0, 10, 11, 15, 19, 20, 21, 22, 23 not connected. Jul 13 21:50:59 p6 kernel: number of MP IRQ sources: 17. Jul 13 21:50:59 p6 kernel: number of IO-APIC registers: 24. Jul 13 21:50:59 p6 kernel: testing the IO APIC....................... Jul 13 21:50:59 p6 kernel: .... register #00: 02000000 Jul 13 21:50:59 p6 kernel: ....... : physical APIC id: 02 Jul 13 21:50:59 p6 kernel: .... register #01: 00170011 Jul 13 21:50:59 p6 kernel: ....... : max redirection entries: 0017 Jul 13 21:50:59 p6 kernel: ....... : IO APIC version: 0011 Jul 13 21:50:59 p6 kernel: .... register #02: 00000000 Jul 13 21:50:59 p6 kernel: ....... : arbitration: 00 Jul 13 21:50:59 p6 kernel: .... IRQ redirection table: Jul 13 21:50:59 p6 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: Jul 13 21:50:59 p6 kernel: 00 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 01 000 00 0 0 0 0 0 1 1 59 Jul 13 21:50:59 p6 kernel: 02 0FF 0F 0 0 0 0 0 1 1 51 Jul 13 21:50:59 p6 kernel: 03 000 00 0 0 0 0 0 1 1 61 Jul 13 21:50:59 p6 kernel: 04 000 00 0 0 0 0 0 1 1 69 Jul 13 21:50:59 p6 kernel: 05 000 00 0 0 0 0 0 1 1 71 Jul 13 21:50:59 p6 kernel: 06 000 00 0 0 0 0 0 1 1 79 Jul 13 21:50:59 p6 kernel: 07 000 00 0 0 0 0 0 1 1 81 Jul 13 21:50:59 p6 kernel: 08 000 00 0 0 0 0 0 1 1 89 Jul 13 21:50:59 p6 kernel: 09 000 00 0 0 0 0 0 1 1 91 Jul 13 21:50:59 p6 kernel: 0a 000 00 1 0 0 0 0 0 0 00 Jul 13 21:51:00 p6 crond: crond startup succeeded Jul 13 21:50:59 p6 kernel: 0b 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 0c 000 00 0 0 0 0 0 1 1 99 Jul 13 21:50:59 p6 kernel: 0d 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 0e 000 00 0 0 0 0 0 1 1 A1 Jul 13 21:50:59 p6 kernel: 0f 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 10 0FF 0F 1 1 0 1 0 1 1 A9 Jul 13 21:50:59 p6 kernel: 11 0FF 0F 1 1 0 1 0 1 1 B1 Jul 13 21:50:59 p6 kernel: 12 0FF 0F 1 1 0 1 0 1 1 B9 Jul 13 21:50:59 p6 kernel: 13 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 14 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 15 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 16 000 00 1 0 0 0 0 0 0 00 Jul 13 21:50:59 p6 kernel: 17 000 00 1 0 0 0 0 0 0 00 Jul 13 21:51:00 p6 rc: Starting pcmcia succeeded Jul 13 21:50:59 p6 kernel: .................................... done. Jul 13 21:50:59 p6 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb81 Jul 13 21:50:59 p6 kernel: PCI: Using configuration type 1 Jul 13 21:50:59 p6 kernel: PCI: Probing PCI hardware Jul 13 21:50:59 p6 kernel: PCI: Enabling I/O for device 00:3a Jul 13 21:50:59 p6 kernel: Linux NET4.0 for Linux 2.2 Jul 13 21:50:59 p6 kernel: Based upon Swansea University Computer Society NET3.039 Jul 13 21:51:00 p6 inet: inetd startup succeeded Jul 13 21:50:59 p6 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. Jul 13 21:50:59 p6 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Jul 13 21:50:59 p6 kernel: IP Protocols: ICMP, UDP, TCP Jul 13 21:50:59 p6 kernel: Initializing RT netlink socket Jul 13 21:50:59 p6 kernel: Starting kswapd v 1.5 Jul 13 21:50:59 p6 kernel: Detected PS/2 Mouse Port. Jul 13 21:50:59 p6 kernel: Serial driver version 4.27 with no serial options enabled Jul 13 21:50:59 p6 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Jul 13 21:50:59 p6 kernel: pty: 256 Unix98 ptys configured Jul 13 21:50:59 p6 kernel: Real Time Clock Driver v1.09 Jul 13 21:50:59 p6 kernel: Non-volatile memory driver v1.0 Jul 13 21:50:59 p6 kernel: RAM disk driver initialized: 16 RAM disks of 4096K size Jul 13 21:50:59 p6 kernel: Floppy drive(s): fd0 is 1.44M Jul 13 21:50:59 p6 kernel: FDC 0 is a post-1991 82077 Jul 13 21:50:59 p6 kernel: (scsi0) <Adaptec AIC-7895 Ultra SCSI host adapter> found at PCI 14/0 Jul 13 21:50:59 p6 kernel: (scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs Jul 13 21:51:00 p6 snmpd: snmpd startup succeeded Jul 13 21:50:59 p6 kernel: (scsi0) Downloading sequencer code... 374 instructions downloaded Jul 13 21:50:59 p6 kernel: (scsi1) <Adaptec AIC-7895 Ultra SCSI host adapter> found at PCI 14/1 Jul 13 21:50:59 p6 kernel: (scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs Jul 13 21:50:59 p6 kernel: (scsi1) Downloading sequencer code... 374 instructions downloaded Jul 13 21:50:59 p6 kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.18/3.2.4 Jul 13 21:50:59 p6 kernel: <Adaptec AIC-7895 Ultra SCSI host adapter> Jul 13 21:50:59 p6 kernel: scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.18/3.2.4 Jul 13 21:50:59 p6 kernel: <Adaptec AIC-7895 Ultra SCSI host adapter> Jul 13 21:50:59 p6 kernel: scsi : 2 hosts. Jul 13 21:50:59 p6 kernel: (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15. Jul 13 21:50:59 p6 kernel: Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.01 Jul 13 21:50:59 p6 kernel: Type: CD-ROM ANSI SCSI revision: 02 Jul 13 21:51:01 p6 lpd: lpd startup succeeded Jul 13 21:50:59 p6 kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Jul 13 21:50:59 p6 kernel: Vendor: RICOH Model: MP6200S Rev: 1.20 Jul 13 21:50:59 p6 kernel: Type: CD-ROM ANSI SCSI revision: 02 Jul 13 21:50:59 p6 kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0 Jul 13 21:50:59 p6 kernel: (scsi1:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8. Jul 13 21:50:59 p6 kernel: Vendor: IBM Model: DDRS-39130W Rev: S92A Jul 13 21:50:59 p6 kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 13 21:50:59 p6 kernel: Detected scsi disk sda at scsi1, channel 0, id 0, lun 0 Jul 13 21:50:59 p6 kernel: (scsi1:0:1:0) Synchronous at 40.0 Mbyte/sec, offset 8. Jul 13 21:50:59 p6 kernel: Vendor: IBM Model: DDRS-39130W Rev: S97B Jul 13 21:50:59 p6 kernel: Type: Direct-Access ANSI SCSI revision: 02 Jul 13 21:51:01 p6 nfs: Starting NFS services: succeeded Jul 13 21:50:59 p6 kernel: Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0 Jul 13 21:50:59 p6 kernel: scsi : detected 2 SCSI cdroms 2 SCSI disks total. Jul 13 21:50:59 p6 kernel: Uniform CDROM driver Revision: 2.55 Jul 13 21:50:59 p6 kernel: sr1: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray Jul 13 21:50:59 p6 kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB] Jul 13 21:50:59 p6 kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB] Jul 13 21:50:59 p6 kernel: Partition check: Jul 13 21:50:59 p6 kernel: sda: sda1 sda2 < sda5 sda6 sda7 > Jul 13 21:50:59 p6 kernel: sdb: sdb1! sdb3 < sdb5 sdb6 sdb7 > < sdb8 sdb9 sdb10 > Jul 13 21:50:59 p6 kernel: NTFS version 990411 Jul 13 21:50:59 p6 kernel: VFS: Mounted root (ext2 filesystem) readonly. Jul 13 21:50:59 p6 kernel: Freeing unused kernel memory: 48k freed Jul 13 21:50:59 p6 kernel: Adding Swap: 120452k swap-space (priority -1) Jul 13 21:51:02 p6 nfs: rpc.statd startup succeeded Jul 13 21:50:59 p6 kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html Jul 13 21:50:59 p6 kernel: eth0: 3Com 3c900 Boomerang 10baseT at 0xef00, 00:10:4b:d5:71:f9, IRQ 11 Jul 13 21:50:59 p6 kernel: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10baseT interface. Jul 13 21:50:59 p6 kernel: Enabling bus-master transmits and whole-frame receives. Jul 13 21:51:01 p6 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Jul 13 21:51:02 p6 nfs: rpc.rquotad startup succeeded Jul 13 21:51:02 p6 nfs: rpc.mountd startup succeeded Jul 13 21:51:03 p6 nfs: rpc.nfsd startup succeeded
Paul Fulghum paulkf@austin.rr.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |