Messages in this thread | | | Date | Mon, 12 Jul 1999 02:28:37 +1000 | From | Reuben Farrelly <> | Subject | Problem compiling 2.3.10 |
| |
Hi,
I am experiencing a problem compiling 2.3.10 modules which I did not experience when compiling 2.3.9. (identical .config file, identical hardware and software in system). The kernel compiles ok, but a make modules fails fairly early on.
Running Redhat 6.0 - egcs-1.1.2-12/Intel Pentium MMX 166/2.3.9 krnl patched to 2.3.10/IDE udma drive. I've tried with and without block devices turned on, but it makes no difference.
Any ideas?
>[root@tornado linux]# make modules >make -C kernel CFLAGS="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer >-pipe > -fno-strength-reduce -DCPU=586 -DMODULE" MAKING_MODULES=1 modules >make[1]: Entering directory `/usr/src/linux-2.3.10/kernel' >make[1]: Nothing to be done for `modules'. >make[1]: Leaving directory `/usr/src/linux-2.3.10/kernel' >make -C drivers CFLAGS="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer >-pip >e -fno-strength-reduce -DCPU=586 -DMODULE" MAKING_MODULES=1 modules >make[1]: Entering directory `/usr/src/linux-2.3.10/drivers' >make -C block modules >make[2]: Entering directory `/usr/src/linux-2.3.10/drivers/block' >gcc -D__KERNEL__ -I/usr/src/linux-2.3.10/include -Wall -Wstrict-prototypes >-O2 - >fomit-frame-pointer -pipe -fno-strength-reduce -DCPU=586 -DMODULE >-DEXPORT_SYM >TAB -c loop.c >loop.c: In function `loop_set_fd': >loop.c:378: structure has no member named `bmap' >make[2]: *** [loop.o] Error 1 >make[2]: Leaving directory `/usr/src/linux-2.3.10/drivers/block' >make[1]: *** [_modsubdir_block] Error 2 >make[1]: Leaving directory `/usr/src/linux-2.3.10/drivers' >make: *** [_mod_drivers] Error 2
My config file is as follows:
># Code maturity level options ># >CONFIG_EXPERIMENTAL=y > ># ># Processor type and features ># ># CONFIG_M386 is not set ># CONFIG_M486 is not set ># CONFIG_M586 is not set >CONFIG_M586TSC=y ># CONFIG_M686 is not set >CONFIG_X86_WP_WORKS_OK=y >CONFIG_X86_INVLPG=y >CONFIG_X86_BSWAP=y >CONFIG_X86_POPAD_OK=y >CONFIG_X86_TSC=y >CONFIG_1GB=y ># CONFIG_2GB is not set ># CONFIG_MATH_EMULATION is not set ># CONFIG_MTRR is not set ># CONFIG_SMP is not set > ># ># Loadable module support ># >CONFIG_MODULES=y ># CONFIG_MODVERSIONS is not set >CONFIG_KMOD=y > ># General setup ># >CONFIG_NET=y >CONFIG_PCI=y ># CONFIG_PCI_GOBIOS is not set ># CONFIG_PCI_GODIRECT is not set >CONFIG_PCI_GOANY=y >CONFIG_PCI_BIOS=y >CONFIG_PCI_DIRECT=y >CONFIG_PCI_QUIRKS=y ># CONFIG_PCI_OPTIMIZE is not set >CONFIG_PCI_OLD_PROC=y ># CONFIG_MCA is not set ># CONFIG_VISWS is not set >CONFIG_SYSVIPC=y >CONFIG_BSD_PROCESS_ACCT=y >CONFIG_SYSCTL=y >CONFIG_BINFMT_AOUT=m >CONFIG_BINFMT_ELF=y >CONFIG_BINFMT_MISC=m ># CONFIG_PARPORT is not set ># CONFIG_APM is not set ># Block devices ># >CONFIG_BLK_DEV_FD=m >CONFIG_BLK_DEV_IDE=y > ># ># Please see Documentation/ide.txt for help/info on IDE drives ># ># CONFIG_BLK_DEV_HD_IDE is not set >CONFIG_BLK_DEV_IDEDISK=y >CONFIG_IDEDISK_MULTI_MODE=y >CONFIG_BLK_DEV_IDECD=m ># CONFIG_BLK_DEV_IDETAPE is not set ># CONFIG_BLK_DEV_IDEFLOPPY is not set ># CONFIG_BLK_DEV_IDESCSI is not set ># CONFIG_BLK_DEV_CMD640 is not set ># CONFIG_BLK_DEV_RZ1000 is not set >CONFIG_BLK_DEV_IDEPCI=y >CONFIG_BLK_DEV_IDEDMA_PCI=y >CONFIG_IDEDMA_PCI_AUTO=y >IDEDMA_NEW_DRIVE_LISTINGS=y ># CONFIG_IDEDMA_ULTRA_66 is not set >IDEDMA_PCI_EXPERIMENTAL=y ># CONFIG_BLK_DEV_OFFBOARD is not set ># CONFIG_BLK_DEV_AEC6210 is not set ># CONFIG_BLK_DEV_ALI15X3 is not set ># CONFIG_BLK_DEV_CMD646 is not set ># CONFIG_BLK_DEV_CY82C693 is not set ># CONFIG_BLK_DEV_HPT34X is not set ># CONFIG_BLK_DEV_PIIX is not set ># CONFIG_BLK_DEV_NS87415 is not set ># CONFIG_BLK_DEV_OPTI621 is not set ># CONFIG_BLK_DEV_PDC202XX is not set ># CONFIG_BLK_DEV_TRM290 is not set >CONFIG_BLK_DEV_VIA82C586=y >CONFIG_BLK_DEV_IDEDMA=y >CONFIG_IDEDMA_AUTO=y ># CONFIG_IDE_CHIPSETS is not set ># CONFIG_BLK_CPQ_DA is not set > ># ># Additional Block Devices ># >CONFIG_BLK_DEV_LOOP=m >CONFIG_BLK_DEV_NBD=m ># CONFIG_BLK_DEV_MD is not set ># CONFIG_BLK_DEV_RAM is not set ># CONFIG_BLK_DEV_XD is not set >CONFIG_PARIDE_PARPORT=y ># CONFIG_PARIDE is not set ># CONFIG_BLK_DEV_IDE_MODES is not set ># CONFIG_BLK_DEV_HD is not set
etc...if there's anything else I need to include pls let me know :)
Reuben
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |