lkml.org 
[lkml]   [1999]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectcan't initialize a serial device with 2.2.9
Hi,

I just upgraded my kernel to 2.2.9 (from 2.0.36), now my ttyS3 doesn't want to be initialized anymore. Initialisation of the device wasn't a problem with 2.0.36

When I use setserial /dev/ttyS3 irq 7 skip_test autoconfig it tells me the resource is busy. setserial -a /dev/ttyS3 tells me the same (and /dev/cua3 also)

No program can use ttyS3

ttys3 is an internal modem I use for fax and answering machine. I have an other internal modem on ttyS2. This device gets initialized still without any problems. Both modems are PNP disabled, with IRQ's set on the card


Any ideas ?



Regards


Cor


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:2.419 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site