Messages in this thread | | | Date | Tue, 15 Jun 1999 17:16:53 -0500 (CDT) | From | Jiann-Ming Su <> | Subject | DAT problem with 2.2.10 |
| |
What does the following dmesg message mean:
scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x8000, IRQ Channel: 25/Level scsi0: PCI Bus: 0, Device: 5, Address: 0x9000000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled scsi0: SCSI Bus Termination: High Enabled, SCAM: Disabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi0 : BusLogic BT-958 scsi : 1 host. Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ARCHIVE Model: Python 28388-XXX Rev: 4.28 Type: Sequential-Access ANSI SCSI revision: 02 Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0 Vendor: TOSHIBA Model: CD-ROM XM-6201TA Rev: 1030 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 scsi0: Target 0: Queue Depth 28, Wide Synchronous at 20.0 MB/sec, offset 15 scsi0: Target 5: Queue Depth 3, Synchronous at 5.00 MB/sec, offset 15 scsi0: Target 6: Queue Depth 3, Synchronous at 10.0 MB/sec, offset 15 scsi : detected 1 SCSI tape 1 SCSI cdrom 1 SCSI disk total. Detected scsi tape st0 at scsi0, channel 0, id 5, lun 0 Unable to get major 9 for SCSI tapes st0: Error with sense data: extra data not valid Current error st09:00: sense key Not Ready
[root@athena /root]# uname -a Linux athena.me.gatech.edu 2.2.10 #27 Tue Jun 15 16:13:42 EDT 1999 alpha unknown
The specific problem I'm having is with BRU. I tell it to append my new archive, and it hangs, until I eject the tape. Thanks for any help.
Jiann-Ming Su "People seldom do what they believe in. They do js1@microwave.ph.msstate.edu what is convenient, then repent." --Bob Dylan
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |