Messages in this thread | | | From | andy@hailesma ... | Subject | PROBLEM | Date | Sat, 3 Apr 1999 19:09:37 +0100 |
| |
[1.] One line summary of the problem:
Not booting
[2.] Full description of the problem/report:
After compiling kernel 2.2.5, running lilo & restarting, The kernel uncompresses ok, I get the message all`s ok, and booting kernel, nothing happens for 30 seconds, then lots of disk activity, followed by a reboot.
[3.] Keywords (i.e., modules, networking, kernel):
kernel
[4.] Kernel version (from /proc/version):
2.2.5
previously (& currently) running.... Linux version 2.0.36 (root@heart-of-lothian) (gcc version 2.7.2.3) #93 Fri Feb 5 13:52:10 GMT 1999
[7.] Environment
Cyrix P233, Graphics Blaster Eclipse video card, Sound blaster AWE64 sound, Canopus 3dfx card, 96 meg ram, advansys scsi card, 2 gig scsi hard disk, 8 gig ide hard disc.
[7.1.] Software (add the output of the ver_linux script here)
Linux hailesmail 2.0.36 #93 Fri Feb 5 13:52:10 GMT 1999 i686 unknown Kernel modules 2.1.121 Gnu C 2.7.2.3 Binutils 2.9.1.0.15 Linux C Library 2.0.7 Dynamic linker ldd (GNU libc) 2.0.7 Linux C++ Library 2.8.0 Procps 1.2.9 Mount 2.8a Net-tools (1999-01-01) Kbd 0.96 Sh-utils 1.16 Modules Loaded vmnet vmmon awe_wave sb uart401 sound soundlow soundcore
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0 cpu : 686 model : M II vendor_id : CyrixInstead stepping : 2.8, core/bus clock ratio: 3x fdiv_bug : no hlt_bug : no f00f_bug : no fpu : yes fpu_exception : yes cpuid : yes wp : yes flags : fpu de tsc msr cx8 pge cmov mmx bogomips : 200.29 [7.3.] Module information (from /proc/modules):
vmnet 3 3 vmmon 3 0 awe_wave 11 0 sb 6 0 uart401 2 [sb] 0 sound 15 [awe_wave sb uart401] 0 soundlow 1 [sound] 0 soundcore 1 [sb sound] 7
[7.4.] SCSI information (from /proc/scsi/scsi)
AdvanSys SCSI 3.1E: PCI Ultra 16 CDB: IO F400/F, IRQ 11 Device Information for AdvanSys SCSI Host 0: Target IDs Detected: 1, 3, 4, 7, (7=Host Adapter) Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: CONNER Model: CFP2107E 2.14GB Rev: 1524 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: SyQuest Model: EZ135S Rev: 1-17 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: PHILIPS Model: CDD2600 Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 EEPROM Settings for AdvanSys SCSI Host 0: Serial Number Signature Not Present. Host SCSI ID: 7, Host Queue Size: 16, Device Queue Size: 8 cntl 7f00, no_scam 0 Target ID: 0 1 2 3 4 5 6 7 Disconnects: Y Y Y Y Y Y Y Y Command Queuing: N N N N N N N N Start Motor: Y Y Y Y Y Y Y Y Synchronous Transfer: N Y N Y N N N N Linux Driver Configuration and Information for AdvanSys SCSI Host 0: host_busy 0, last_reset 0, max_id 8, max_lun 8, max_channel 0 unique_id 0, can_queue 16, this_id 7, sg_tablesize 50, cmd_per_lun 0 unchecked_isa_dma 0, use_clustering 1, loaded_as_module 0 flags 8, last_reset 0, jiffies 1ff92 queue_depth: 1:4 3:4 4:4 Linux Driver Statistics for AdvanSys SCSI Host 0: command 0, queuecommand 2390, abort 0, reset 0, biosparam 0 interrupt 2395, callback 2390, done 2390 exe_noerror 2390, exe_busy 0, exe_error 0, exe_unknown 0 build_error 0 cont_cnt 1937, cont_xfer 2804.5 kb avg_xfer 1.4 kb sg_cnt 453, sg_elem 1173, sg_xfer 3434.0 kb avg_num_elem 2.5, avg_elem_size 2.9 kb, avg_xfer_size 7.5 kb Active and Waiting Request Queues (Time Unit: 100 HZ): target 1 active: cnt [cur 0, max 4, tot 2378], time [min 0, max 6, avg 1.1] waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0] target 3 active: cnt [cur 0, max 1, tot 6], time [min 0, max 1, avg 0.1] waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0] target 4 active: cnt [cur 0, max 1, tot 2], time [min 0, max 1, avg 0.5] waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0] Asc Library Configuration and Statistics for AdvanSys SCSI Host 0: chip_version 11, lib_version 116, lib_serial_no 113, mcode_date 1091 mcode_version 50a, err_code 0 Total Command Pending: 0 Command Queuing: 1:N 3:N 4:N Command Queue Pending: 1:0 3:0 4:0 Command Queue Limit: 1:4 3:4 4:4 Command Queue Full: 1:N 3:N 4:N Synchronous Transfer: 1:Y 3:Y 4:N 1: Transfer Period Factor: 25 (10.0 Mhz), REQ/ACK Offset: 15 3: Transfer Period Factor: 50 (5.0 Mhz), REQ/ACK Offset: 15
Thanks in advance.
-- Cheers /\ /--\NDY http://www.hailesmail.net
The home of `Echoes of Insanity' & `Begin Linux' Mailing Lists
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |