Messages in this thread | | | Date | Thu, 29 Apr 1999 10:24:01 -0700 (PDT) | From | Christoph Lameter <> | Subject | 2.2.7ac1: Still broken Generic SCSI with CRW1622 writing CDs |
| |
Just tried to write a RH 6.0 CD and found that the old breakage still exists. Booted to 2.2.5ac1 and it worked fine. This also works without a hitch with 2.0.X kernels.
Output from sessioin:
bash-2.02$ cdrecord redhat60.iso Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling scsidev: '0,0' scsibus: 0 target: 0 lun: 0 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'Memorex ' Identifikation : 'CRW-1622 ' Revision : 'D4.0' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Starting to write CD at speed 2 in write mode for single session. Last chance to quit, starting real write in 1 seconds. cdrecord: Success. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 10 00 00 10 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 02 00 00 00 00 0A 00 0C 51 16 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x 0 Sense flags: Blk 0 (valid) cmd finished after 0.003s timeout 40s write track data: error after 32768 bytes Sense Bytes: F0 00 00 00 00 00 00 0A 00 0C 4A 89 00 00 00 00 00 00 cdrecord: Success. flush cache: scsi sendcmd: retryable error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 02 00 00 00 00 0A 00 0C 4A 89 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x 0 Sense flags: Blk 0 (valid) cmd finished after 0.001s timeout 120s Trouble flushing the cache cdrecord: Success. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 02 00 00 00 00 0A 00 0C 4A 89 04 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x 0 Sense flags: Blk 0 (valid) cmd finished after 0.002s timeout 480s
Kernel Messages:
Apr 29 09:43:38 cyrix200 kernel: scsi : aborting command due to timeout : pid 55 , scsi0, channel 0, id 0, lun 0 Write (10) 00 00 00 00 00 00 00 10 00 Apr 29 09:43:38 cyrix200 kernel: hdc: irq timeout: status=0xd0 { Busy } Apr 29 09:43:40 cyrix200 kernel: hdc: ATAPI reset complete Apr 29 09:43:40 cyrix200 kernel: hdc: irq timeout: status=0xd0 { Busy } Apr 29 09:43:41 cyrix200 kernel: hdc: ATAPI reset complete Apr 29 09:43:41 cyrix200 kernel: hdc: irq timeout: status=0xd0 { Busy }
relevant parts of bootup messages:
Apr 29 10:18:28 cyrix200 kernel: CPU: Cyrix 6x86L 2x Core/Bus Clock stepping 02 Apr 29 10:18:28 cyrix200 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Apr 29 10:18:28 cyrix200 kernel: Checking 'hlt' instruction... OK. Apr 29 10:18:28 cyrix200 kernel: POSIX conformance testing by UNIFIX Apr 29 10:18:28 cyrix200 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb470 Apr 29 10:18:28 cyrix200 kernel: PCI: Using configuration type 1 Apr 29 10:18:28 cyrix200 kernel: PCI: Probing PCI hardware
Apr 29 10:18:28 cyrix200 kernel: VP_IDE: IDE controller on PCI bus 00 dev 39 Apr 29 10:18:28 cyrix200 kernel: VP_IDE: not 100% native mode: will probe irqs later Apr 29 10:18:28 cyrix200 kernel: ide0: BM-DMA at 0x6000-0x6007, BIOS settings: hda:pio, hdb:pio Apr 29 10:18:28 cyrix200 kernel: ide0: VIA Bus-Master (U)DMA Timing Config Success Apr 29 10:18:28 cyrix200 kernel: ide1: BM-DMA at 0x6008-0x600f, BIOS settings: hdc:pio, hdd:pio Apr 29 10:18:28 cyrix200 kernel: ide1: VIA Bus-Master (U)DMA Timing Config Success Apr 29 10:18:28 cyrix200 kernel: hda: Maxtor 87000D8, ATA DISK drive Apr 29 10:18:28 cyrix200 kernel: hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) Apr 29 10:18:28 cyrix200 kernel: hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) Apr 29 10:18:28 cyrix200 kernel: hdc: Memorex CRW-1622, ATAPI CDROM drive Apr 29 10:18:28 cyrix200 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Apr 29 10:18:28 cyrix200 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Apr 29 10:18:28 cyrix200 kernel: hda: Maxtor 87000D8, 6679MB w/256kB Cache, CHS=851/255/63, (U)DMA Apr 29 10:18:28 cyrix200 kernel: Floppy drive(s): fd0 is 1.44M Apr 29 10:18:28 cyrix200 kernel: FDC 0 is an 8272A Apr 29 10:18:28 cyrix200 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Apr 29 10:18:28 cyrix200 kernel: scsi : 1 host. Apr 29 10:18:28 cyrix200 kernel: Vendor: Memorex Model: CRW-1622 Rev: D4.0 Apr 29 10:18:28 cyrix200 kernel: Type: CD-ROM ANSI SCSI revision: 02 Apr 29 10:18:28 cyrix200 kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Apr 29 10:18:28 cyrix200 kernel: scsi : detected 1 SCSI cdrom total. Apr 29 10:18:28 cyrix200 kernel: sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray Apr 29 10:18:28 cyrix200 kernel: Uniform CDROM driver Revision: 2.54
----------------------------------------------------------------------------- Christoph Lameter, MSCS, M.Div. Available for a job or consulting (see http://lameter.com/consulting.html) -----------------------------------------------------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |