Messages in this thread | | | Date | Fri, 26 Mar 1999 12:35:07 +0000 | From | Nir Shterman <> | Subject | scsi prob |
| |
Hello, I have an Adaptec AHA-152x SCSI controller and, I compiled the driver and during boot it seems to initialize correctly:
aha152x: processing commandline: ok aha152x: BIOS test: passed, detected 1 controller(s) aha152x0: vital data: PORTBASE=0x340, IRQ=9, SCSI ID=7, reconnect=enabled, parit y=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ scsi : 1 host. Vendor: SAF Model: CD-R4012 Rev: 6.0G Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 scsi : detected 1 SCSI cdrom total.
but When i try to mount /dev/scd0, my SCSI CD-ROM, my box gives me the message:
scsi: aborting command due to timeout: pid26, scsi0, channel 0, id 6, lun 0 read (10) 00 00 00 00 01 00 aga152x: abort() SCpnt = 0xc031bc00 QUEUE STATUS: issue_dc current_sc none disconnect_sc enables interupts (ENEBLEDI)
- and then dies.
can you please help me?
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |