Messages in this thread | | | Date | Mon, 22 Mar 1999 23:02:46 +0100 | From | Ronald Meijerink <> | Subject | Re: PROBLEM: SCSI with 2 controlers.. |
| |
On Sun, Mar 21, 1999 at 02:40:56PM -0500, Jay.Estabrook@digital.com wrote:
Hello Jay,
> > > Non booting Alpha axpci33 with 2 scsi controlers > > > > i have 2 ncr 810 controlers (1 on board and 1 on the pci bus) this worked > > okay until kernel version 2.2.0-final. also have the same problem with > > the same type of alpha ( 3 ncr and 1 ide controlers) the same kernels > > works okay on an multia system. > > > > ncr53c8xx: at PCI bus 0, device 6, function 0 > > ncr53c8xx: 53c810 detected > > ncr53c8xx: at PCI bus 0, device 11, function 0 > > ncr53c8xx: 53c810 detected > > ncr53c810-0: rev=0x01, base=0x4200000, io_port=0x8000, irq=11 > > ncr53c810-0: ID 7, Fast-10, Parity Checking > > ncr53c810-0: restart (scsi reset). > > ncr53c810-1: rev=0x01, base=0x5000000, io_port=0x8800, irq=14 > > ncr53c810-1: ID 7, Fast-10, Parity Checking > > ncr53c810-1: restart (scsi reset). > > scsi0 : ncr53c8xx - revision 3.1f > > scsi1 : ncr53c8xx - revision 3.1f > > scsi : 2 hosts. > > The IRQ of 14 for the second SCSI looks bad, and shouldn't be able to > happen unless something was misconfigured. > > Did you configure the kernel for booting from SRM *and* for using SRM_SETUP? > If this is so, try *not* using the SRM_SETUP, and see if it works better.
Don't use SRM here ARC boot only
> > Instead, you might try moving the SCSI card to a different slot, which would > change the interrupt that was bieing assigned to it. > It looks like what you said is correct placed the scsi card in another slot an this computer is up and running with 2.2.3-ac4 but is stil have one small problem with the fileserver (this was the cdrom server). this one has 3 scsi and i use the ide port for aan harddisk the info...
Linux version 2.1.130 (root@big-fun.bighole.iaf.nl) (gcc version 2.7.2.3) #9 Sun Nov 29 18:03:44 CET 1998 Booting on Noname using machine vector Noname Command line: bootdevice=hda2 bootfile=vml-2.1.130.gz root=/dev/hda2 Console: colour VGA+ 80x25 Calibrating delay loop... 162.53 BogoMIPS Memory: 62296k available POSIX conformance testing by UNIFIX Alpha PCI BIOS32 revision 0.04 PCI: Probing PCI hardware Swansea University Computer Society NET3.039 for Linux 2.1 NET3: Unix domain sockets 0.16 for Linux NET3.038. Swansea University Computer Society TCP/IP for NET3.037 IP Protocols: ICMP, UDP, TCP Starting kswapd v 1.5 Serial driver version 4.26 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured hda: QUANTUM FIREBALL EX6.4A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: QUANTUM FIREBALL EX6.4A, 6149MB w/418kB Cache, CHS=13328/15/63 Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 ncr53c8xx: at PCI bus 0, device 6, function 0 ncr53c8xx: 53c810 detected ncr53c8xx: at PCI bus 0, device 8, function 0 ncr53c8xx: PCI_CACHE_LINE_SIZE not set, features based on CACHE LINE SIZE not used. ncr53c8xx: 53c810a detected ncr53c8xx: at PCI bus 0, device 11, function 0 ncr53c8xx: PCI_CACHE_LINE_SIZE not set, features based on CACHE LINE SIZE not used. ncr53c8xx: 53c810a detected ncr53c810-0: rev=0x01, base=0x4200000, io_port=0x8000, irq=11 ncr53c810-0: ID 7, Fast-10, Parity Checking ncr53c810-0: restart (scsi reset). ncr53c810a-1: rev=0x12, base=0x4201000, io_port=0x8800, irq=10 ncr53c810a-1: ID 7, Fast-10, Parity Checking ncr53c810a-1: restart (scsi reset). ncr53c810a-2: rev=0x12, base=0x4202000, io_port=0x9000, irq=9 ncr53c810a-2: ID 7, Fast-10, Parity Checking ncr53c810a-2: restart (scsi reset). scsi0 : ncr53c8xx - revision 3.1b scsi1 : ncr53c8xx - revision 3.1b scsi2 : ncr53c8xx - revision 3.1b scsi : 3 hosts. Vendor: QUANTUM Model: FIREBALL SE8.4S Rev: PJ0A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi2, channel 0, id 0, lun 0 Vendor: Quantum Model: XP34300 Rev: F76D Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi2, channel 0, id 1, lun 0 Vendor: QUANTUM Model: FIREBALL ST6.4S Rev: 0F0C Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdc at scsi2, channel 0, id 2, lun 0 ncr53c810a-2-<0,0>: tagged command queue depth set to 8 ncr53c810a-2-<1,0>: tagged command queue depth set to 8 ncr53c810a-2-<2,0>: tagged command queue depth set to 8 scsi : detected 3 SCSI disks total. ncr53c810a-2-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) SCSI device sda: hdwr sector= 512 bytes. Sectors= 16777215 [8191 MB] [8.2 GB] ncr53c810a-2-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8399520 [4101 MB] [4.1 GB] ncr53c810a-2-<2,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) SCSI device sdc: hdwr sector= 512 bytes. Sectors= 12657717 [6180 MB] [6.2 GB]
And it breaks here but with 2.2.3-ac4 it only gives one error...
eth0: 3c509 at 0x340 tag 1, 10baseT port, address 00 60 97 2a ac a8, IRQ 5. 3c509.c:1.12 6/4/97 becker@cesdis.gsfc.nasa.gov Partition check: sda: sda1 sda2 sda3 sda4 sdb: sdb1 sdc: sdc1 hda: hda1 hda2 hda3 hda4 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 72k freed Adding Swap: 31736k swap-space (priority -1) Adding Swap: 65664k swap-space (priority -2)
Linux 2.1.122 (root@big-fun.bighole.iaf.nl) (gcc 2.7.2.3) #12 [big-fun]
Memory: Total Used Free Shared Buffers Cached Mem: 62352 60800 1552 6824 27912 19256 Swap: 97400 2672 94728
Bootup: Sun Feb 7 17:19:33 1999 Load average: 0.00 0.00 0.00 1/27 5177
user : 9:12:45.66 0.9% page in : 3292558 disk 1: 666753r 157151w nice : 0:00:00.00 0.0% page out: 2541148 disk 2: 150231r 41784w system: 8:08:28.58 0.8% swap in : 3118 disk 3: 156737r 32115w idle : 42d 9:12:14.90 98.3% swap out: 484 uptime: 43d 2:33:29.12 context : 23411945
irq 1: 2245 keyboard irq 8:3813294569 timer irq 3: 1 irq 9: 747110 53c7,8xx irq 4: 1 irq 10: 8 53c7,8xx irq 5: 17126924 3c509 irq 11: 8 53c7,8xx irq 6: 3 irq 14: 473898 ide0
> Please, let me know what happens, either way. >
Okay one up and one more to go can you help with my file server. Thanks in advance.
> --Jay++ >
Gr. Ronald Meijerink
> ------------------------------------------------------------------------------- > American Non Sequitur Society: we don't make sense, but we do like pizza... > > Jay A Estabrook Alpha Motherboards - LINUX Project > Compaq Computer Corporation (508) 841-3241 or (DTN) 237-3241 > 334 South Street, Shrewsbury, MA 01545 Jay.Estabrook@digital.com > -------------------------------------------------------------------------------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |