Messages in this thread | | | Date | Wed, 10 Mar 1999 12:04:06 -0800 (PST) | From | Joao Marigonda <> | Subject | Re: Problems with ATA FLASH MEMORY |
| |
My flash memory is manufactured by hitachi and it doesnt work in LBA but in NORMAL mode. Would you please send me more details about your environment... (Is your kernel 2.0.3x?)
Thanks a lot
---"B. James Phillippe" <bryan@terran.org> wrote: > > On Wed, 10 Mar 1999, Alan Cox wrote: > > > > emulation. The problem for us turned out to be that the IDE emulation > > > reported the flash as being removable when it was not. > > > > The card it does it to me on is definitely removable, its PCMCIA > > Ours is the flash/IDE used in our Firebox-II (and later) model firewalls. > I think it is manufactured by Smart Modular Technologies. Here is it's > ident info: > > Model=, FwRev=Ver.7.0, SerialNo= > Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic } > RawCHS=250/4/16, TrkSize=8448, SectSize=528, ECCbytes=4 > BuffType=1(1Sect), BuffSize=0kB, MaxMultSect=1, MultSect=off > DblWordIO=no, maxPIO=2(fast), DMA=no > CurCHS=250/4/16, CurSects=16000, LBA=yes, LBAsects=16000 > IORDY=yes > > Note that it claims it is removeable, and lacks a Model and Serial No. It > is not removable though; it's soldered to the mainboard. :) > > -bp > -- > B. James Phillippe . bryan@terran.org > Software Engineer, WGT Inc. . http://www.terran.org/~bryan > >
_________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |