Messages in this thread | | | Date | Mon, 8 Feb 1999 18:14:41 +0200 (EET) | From | Serguei Koubouchine <> | Subject | The strange behaviour of gdth driver |
| |
Hi, gentlemen!
The gdth driver ver. 1.17 moves the boot hard drive with ID 0 to the end of the found SCSI devices list. I did have Fujitsu MO drive, Pioneer CD-ROM and IBM DGHS 18 Gbyte drive connected to the only channel of GDT6117RP adapter. When using the version 1.16 driver (in 2.2.0-pre6-ac2) SCSI devices got detected according to their SCSI IDs (HDD then MO drive, then CD-ROM) and my HDD was /dev/sda. With 1.17 (in 2.2.1/2.2.1-ac5) the HDD has been moved to the end of the list and /dev/sda has been assigned to the MO drive. I did hook MO drive to another adapter which I do use only for a CD recorder and was able to boot the system, but it's not the right thing to do. Now I have the following on the GDT6117RP:
=== Cut === VFS: Mounted root (ext2 filesystem). Configuring GDT-PCI HA at 0/18 IRQ 9 scsi0 : GDT6117RP scsi : 1 host. Vendor: PIONEER Model: CD-ROM DR-U16S Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0 Vendor: ICP Model: Host Drive #00 Rev: Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 1, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray === Cut ===
Can you explain why the HDD got last in the list? And why the CD-ROM is on the channel 0 and HDD on channel 1? The controller itself has only one channel...
And these are the boot messages from 2.2.0-pre6-ac2 which DOES work right:
=== Cut === VFS: Mounted root (ext2 filesystem). Configuring GDT-PCI HA at 0/18 IRQ 9 scsi0 : GDT6117RP/GDT6517RP (PCI) scsi : 1 host. Vendor: ICP Model: Host Drive #00 Rev: Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: FUJITSU Model: M2513EL Rev: 0020 Type: Optical Device ANSI SCSI revision: 02 Detected scsi removable disk sdb at scsi0, channel 0, id 4, lun 0 Vendor: PIONEER Model: CD-ROM DR-U16S Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0 sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray === Cut ===
Will it be fixed?
=========================================================================== Serguei Koubouchine aka the Tamer < > The impossible we do immediately. e-mail: ksi@ksi-linux.com SK320-RIPE < > Miracles require 24-hour notice. ===========================================================================
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |