Messages in this thread | | | From | Gaetan_Meister@notes ... | Date | Fri, 5 Feb 1999 12:45:54 +0000 | Subject | Wangdat 3100 + kernel 2.0.36 = not recognized |
| |
Hello everybody,
Since I have Linux on my system, I never succeeded to make my Wangdat work.
I hope I will find ppl who already had this kind of prb in the past and resolved it.
few month ago, I installed the RH5.0 on my system and my wangdat 3100 was well detected but I had I/O errors and there was no way to tar or have a status on the drive. I spent so many time on the newsgroup that I dropped this issue for a while.
Since this time, I upgraded my system to RH5.2 (kernel 2.0.36) and I also added an IDE TRAXDATA 2260 CD-R recognized as a SCSI device WORM instead of WANGDAT
I thought that was an issue with an ID conflict, so I changed the Wangdat ID as well as the Plextor ID but nothing changed.
My system is a P166 MMX with an ASUS TX97-LE motherboard Here is what I have on the SCSI chain:
Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: WangDAT Model: Model 3100 Rev: 1.5a Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: PLEXTOR Model: CD-ROM PX-6XCS Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02
This is what was detected under RH5.0
I can send logs if required I really need your help on this one Thanks in advance ___________________________________________________ Gaetan Meister Software Engineer SMS Group http://www.amdahl.com/aplus Amdahl DMR
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |