Messages in this thread | | | From | "Geoffrey Hardy" <> | Subject | Re: adaptec ava-1505 card | Date | Thu, 04 Feb 1999 10:56:49 PST |
| |
I'm having trouble getting my 1505 to work as well. I used the ISAPNP tool to configure it for io port 0x140 and IRQ 11, but this is the message I get when I try to load the module:
# insmod aha152x aha152x=0x140,11,7,1,0 aha152x: BIOS test: passed, detected 1 controller(s) aha152x0: vital data: PORTBASE=0x140, IRQ=11, SCSI ID=7, reconnect=enabled, parity=disabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, lost. aha152x: IRQ 11 possibly wrong. Please verify. scsi : 0 hosts. /lib/modules/2.2.1/scsi/aha152x.o: init_module: Device or resource busy
I'm not sure how to debug this problem. Any help would be appreciated.
Thanks, Geoff ghardy@biztravel.com
> I also have a 1505 with a microtek scanner 636. > > Use the latest isapnp tools to set up ! > Make an insmod 152x with the appropriate parameters. > (I have options aha152x aha152x=0x140,11,7,1,1 in /etc/conf.modules) > > > If you have any further questions, feel free to ask. > > > Frank > frankb@ipf.de > > > > > On Fri, 4 Dec 1998, Richard A Nelson wrote: > > > > > > I couldn't find anything in Documentation/scsi, or drivers/scsi > > regarding this card... > > > > Has anyone seen it, and does one of the extant drivers work for it? > > > > Thanks, > > -- > > Rick Nelson > > > > > >
______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |