lkml.org 
[lkml]   [1999]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PROBLEM: IRQ of ISAPNP card is not where I put it with isapnp in 2.2.x +kernel.
> From: "Peter J. de Vrijer" <peter@pa3ebv.cistron.nl>
> Date: Sun, 31 Jan 1999 22:11:39 +0100 (CET)
> Subject: PROBLEM: IRQ of ISAPNP card is not where I put it with isapnp in 2.2.x kernel.
>
> Description follows suggestion of Frohwalt Egerer.
> Please keep me informed of fixes by including me in the CC list.
>
> [1.] IRQ of ISAPNP card is not where I put it with isapnp in 2.2.x kernel.
No.
>
> [2.] I use a Eicon.Diehl Diva 2.01 ISDN card. It's a ISA PnP card.
> In kernel 2.0.36 everything works fine. I put the io address at 0x260 and
> the IRQ at 11 with isapnp. That goes without problems.
> In the 2.2.x kernels (both 0 and 1 the same) I have the following problem:
Diva 2.01 is not supported in HiSax 2.8, which is in 2.2.X in the moment.
(In 2.0.36 is HiSax 3.1)
Please use the latest HiSax CVS snapshoot for 2.1 from
ftp.suse.com/pub/isdn4linux/v2.1/isdn-tar.gz
Read ftp.suse.com/pub/isdn4linux/README first.
You can use the same i4k-utils like under 2.0.36, but have to recompile it.

Karsten

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.023 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site