Messages in this thread | | | From | "Otto Meier" <> | Date | Tue, 07 Dec 1999 21:43:53 +0100 | Subject | difference for pci ints between kernel series 2.0 vs 2.2, 2.3 |
| |
I have the following problem with my notebook Mitac 6031. With linux kernel 2.0.x everythink is working fine. The pcmcia bridge gets interrupts allocated. On the newer kernels 2.2.x and 2.3.x the bridge doesn't get an pci int.. If compiled kernels with all three posibilties for PCI setting. No difference at all.
lspci -b -vv shows IRQ 10 for the cardbus-bridge,
00:00.0 Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 set
00:01.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set
00:01.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Region 4: I/O ports at 1100
00:01.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at 1000 [disabled]
00:01.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 VGA compatible controller: Trident Microsystems TGUI 9660/9680/9682 (rev d3) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 255 Region 0: Memory at fdc00000 (32-bit, non-prefetchable) Region 1: Memory at fe7f0000 (32-bit, non-prefetchable) Region 2: Memory at fe000000 (32-bit, non-prefetchable)
03.0 CardBus bridge: O2 Micro, Inc. 6832 (rev 03) Subsystem: Unknown device 1217:6832 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin A routed to IRQ 10 Region 0: Memory at 10000000 (32-bit, non-prefetchable) Bus: primary=00, secondary=00, subordinate=00, sec-latency=0 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite- 16-bit legacy interface ports at 0007
00:03.1 CardBus bridge: O2 Micro, Inc. 6832 (rev 03) Subsystem: Unknown device 1217:6832 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin B routed to IRQ 10 Region 0: Memory at 10001000 (32-bit, non-prefetchable) Bus: primary=00, secondary=00, subordinate=00, sec-latency=0 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite- 16-bit legacy interface ports at 0007
lspci -vv shows none allocated (IRQ 0).
00:00.0 Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 set
00:01.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set
00:01.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Region 4: I/O ports at 1100
00:01.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at 1000 [disabled]
00:01.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 VGA compatible controller: Trident Microsystems TGUI 9660/9680/9682 (rev d3) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at fdc00000 (32-bit, non-prefetchable) Region 1: Memory at fe7f0000 (32-bit, non-prefetchable) Region 2: Memory at fe000000 (32-bit, non-prefetchable)
00:03.0 CardBus bridge: O2 Micro, Inc. 6832 (rev 03) Subsystem: Unknown device 1217:6832 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin A routed to IRQ 0 Region 0: Memory at 10000000 (32-bit, non-prefetchable) Bus: primary=00, secondary=00, subordinate=00, sec-latency=0 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite- 16-bit legacy interface ports at 0007
00:03.1 CardBus bridge: O2 Micro, Inc. 6832 (rev 03) Subsystem: Unknown device 1217:6832 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin B routed to IRQ 0 Region 0: Memory at 10001000 (32-bit, non-prefetchable) Bus: primary=00, secondary=00, subordinate=00, sec-latency=0 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite- 16-bit legacy interface ports at 0007
If I load the pcmcia modules the system hangs.
How can I fix this. Hope someone can help me.
bye
Otto
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |