Messages in this thread | | | Subject | 2.3.33 w/ HIGHMEM: kernel panic in scsi_merge.c | From | Christoph Rohland <> | Date | 20 Dec 1999 17:26:31 +0100 |
| |
Hi folks,
Here is the scsi-related boot log of my 8GB machine with HIGHMEM enabled:
FDC 0 is a post-1991 82077 sym53c8xx: at PCI bus 0, device 10, function 0 sym53c8xx: 53c896 detected sym53c8xx: at PCI bus 0, device 10, function 1 sym53c8xx: 53c896 detected sym53c896-0: rev=0x05, base=0xf8005400, io_port=0x1000, irq=58 sym53c896-0: ID 7, Fast-40, Parity Checking sym53c896-0: on-chip RAM at 0xf8000000 sym53c896-0: restart (scsi reset). sym53c896-0: handling phase mismatch from SCRIPTS. sym53c896-0: Downloading SCSI SCRIPTS. sym53c896-1: rev=0x05, base=0xf8005800, io_port=0x1400, irq=18 sym53c896-1: ID 7, Fast-40, Parity Checking sym53c896-1: on-chip RAM at 0xf8002000 sym53c896-1: restart (scsi reset). sym53c896-1: handling phase mismatch from SCRIPTS. sym53c896-1: Downloading SCSI SCRIPTS. ncr53c8xx: at PCI bus 0, device 10, function 0 ncr53c8xx: IO region 0x1000 to 0x107f is in use ncr53c8xx: at PCI bus 0, device 10, function 1 ncr53c8xx: IO region 0x1400 to 0x147f is in use scsi0 : sym53c8xx - version 1.5f scsi1 : sym53c8xx - version 1.5f scsi : 2 hosts. Vendor: SEAGATE Model: ST318203LC Rev: 0002 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: SEAGATE Model: ST39102LC Rev: 0005 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Vendor: ESG-SHV Model: SCA HSBP M8 Rev: 0.05 Type: Processor ANSI SCSI revision: 02 sym53c896-0-<0,0>: tagged command queue depth set to 4 sym53c896-0-<1,0>: tagged command queue depth set to 4 scsi : detected 2 SCSI disks total. sym53c896-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sda: hdwr sector= 512 bytes. Sectors= 35566480 [17366 MB] [17.4 GB] sym53c896-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15) SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB] eepro100.c:v1.09j 7/27/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivel eth0: Intel PCI EtherExpress Pro100 at 0xf880a000, 00:A0:C9:B4:54:AA, IRQ 36. Board assembly 668081-004, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x3c15c8f1). Receiver lock-up workaround activated. eepro100.c:v1.09j 7/27/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivel Partition check: sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > Real Time Clock Driver v1.09b VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 192k freed Kernel panic: Attempt to merge sector that doesn't belong
It works w/o HIGHMEM.
Greetings Christoph
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |