Messages in this thread | | | Date | Sat, 18 Dec 1999 22:19:38 -0500 (EST) | From | Mike Frisch <> | Subject | Re: [Fwd: Dual Celery on BP6] |
| |
On Sat, 18 Dec 1999, Simon Kirby wrote:
> It might be worth noting that I'm running two SLOT 1 Celeron 300As > (drilled and soldered to work) on an ASUS P2B-DS board, and I can
AFAIK, nobody else has reported this problem on any other board. It appears to be exclusive to the BP6. I hold great respect for ASUS boards, but they're quite a bit more expensive than the BP6 (especially the SMP boards).
> well). I'm also using a fairly cheap power supply, and I can see the > voltage drop quite easily when the CPUs are not idling.
Perhaps the BP6 is more sensitive to power fluctuations than other boards (perhaps poor voltage regulation?)
Mike.
====================================================================== Mike Frisch Email: mfrisch@saturn.tlug.org Northstar Technologies WWW: http://saturn.tlug.org/~mfrisch Newmarket, Ontario, CANADA ======================================================================
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |