lkml.org 
[lkml]   [1999]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: 2.3.33 and USB Zip ???
Date
To get usb-scsi devices to work, I have usually
had to enter:
> echo "scsi add-single-device 1 0 0 0" > /proc/scsi/scsi

after the usb_scsi driver find the device.
This apparently causes a rescan of the SCSI bus/devices.
(The echo > /proc/scsi/scsi is documented in the
SCSI Programming HOWTO.)
Then you should be able to mount the device.

Someone is working on the driver so that this won't be
necessary in the future.

~Randy

> -----Original Message-----
> From: Gregoire FAVRE [mailto:gregoire.favre@urbanet.ch]
> Sent: Thursday, December 16, 1999 9:27 AM
> To: Linux Kernel
> Subject: 2.3.33 and USB Zip ???
>
> Hello,
>
> just compiled in, from dmesg:
> ...
> usbcore: Registered new driver hub
> Detected 2 ports
> New USB bus registered, assigned bus number 1
> usbcore: Registered new driver usb_scsi
> USB SCSI support registered.
> ...
> scsi : 0 hosts.
> scsi : detected total.
> ...
>
> And /proc/scsi/scsi:
> Attached devices: none
>
> What I am wrong with?
>
> Please, don't cc to me: I am on the list...
>
> Greg ICQ:16624071 mailto:greg@ulima.unil.ch
> ____________________________________________________________________
> http://www.unil.ch/ima/docs/Personnes/gfavre


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.140 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site