lkml.org 
[lkml]   [1999]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectFW: Help on Raw I/O Patch?
Date

Hello All,
I'm kind of up a creek here and am hoping someone can bail me out. Sorry
for my ignorance, but here's the situation.....
I have a v2.2.11 system to which I applied the raw-2.2.11-pre1.diff patch
from raw-19990728. I applied the patch,
#mknod /dev/raw c 162 0 through #mknod /dev/raw4 c 162 4,
#chmod 600 /dev/raw*
and tried to do a #raw /dev/raw1 /dev/sdb1 through #raw /dev/raw4 /dev/sde1
to bind the raw devices to the block devices.
When I try to do a bind, I get an error of "Cannot open master raw device
'dev/raw' (No such device)".
/dev/raw is listed in /dev.....what am I missing? Is there something else
that I forgot to do?
Also, after I applied the patch, I am getting an error on the #make install
while trying to recompile the kernel.
The error is as follows:
memory.c: In function `get_page_map':
memory.c:1005: `ZERO_PAGE' undeclared (first use in this function)
memory.c:1005: (Each undeclared identifier is reported only once
memory.c:1005: for each function it appears in.)
make[2]: *** [memory.o] Error 1
make[1]: *** [first_rule] Error 2
make: *** [_dir_mm] Error 2
What am I doing wrong?
Any suggestions are greatly appreciated! Thanks for your help.
Heather



--
To unsubscribe: mail redhat-list-request@redhat.com with "unsubscribe"
as the Subject.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.034 / U:2.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site