lkml.org 
[lkml]   [1999]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectBP6, new flash

yesterday I flashed a new BIOS into the abit BP6, equipped with two 466 MHz
Celerons, in order to have power-on after a power failure.

I also run 2.2.14pre9-smp (and 2.2.13-up for eventual recovery).

a few things didn't go well.

1) I had to force linux with append mem=256 MB to get all memory
detected, the old BIOS version didn't.

what can I tell abit ? what did they do "wrong" ?

2) I see this in the dmesg :

mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs

same question, what do they do "wrong"..

3) I see this in the dmesg :

Intel MultiProcessor Specification v1.1

while the BIOS is set at MPS rev 1.4. Are these entries related or not ?

I ask these questions in order to be able to ask abit to fix eventual BIOS
problems.



--
Grobbebol's Home | Don't give in to spammers. -o)
http://www.xs4all.nl/~bengel | Use your real e-mail address /\
Linux 2.2.13 SMP 2x466MHz / 256 MB | on Usenet. _\_v

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.054 / U:1.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site