lkml.org 
[lkml]   [1999]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectASUS P5A DMA
I don't know if this helps you at all, but the 2.3.x kernels have support for
that chipset by default. I've been using it since about 2.3.16, and have had
no problems whatsoever.

Significant boot messages below:

ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPC3084AT, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 7500, ATAPI CDROM drive
hdd: FX140S, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ALI15X3: Ultra DMA enabled
hda: FUJITSU MPC3084AT, 8063MB w/0kB Cache, CHS=1027/255/63, UDMA(33)
ALI15X3: MultiWord DMA enabled
hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache, DMA
Uniform CD-ROM driver Revision: 3.05
ALI15X3: MultiWord DMA enabled
hdd: ATAPI 16X CD-ROM drive, 256kB Cache, DMA

--
Brent M. Smith, <brent@calwestmu.com>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.051 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site