Messages in this thread | | | Date | Sat, 23 Oct 1999 23:08:47 +0100 | From | Colin Phipps <> | Subject | Sound related oops on 2.2.13ac1 |
| |
I get an oops loading 2.2.12ac1 during boot-up. Loading normal 2.2.13, which works fine for me (using the same .config) (as have many previous kernels), I get:
Sound initialization started <Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5 <Sound Blaster 16> at 0x330 irq 5 dma 0 <Yamaha OPL3> at 0x388 Sound initialization complete
..but loading 2.2.13ac1, it oops's right after the second line there.
Unable to handle kernel paging request at virtual addres c2801ffc current->tss.cr3=00101000, %cr3=00101000 Oops: 0000 CPU: 0 EIP: 0010:[<c01a551b> Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010206 eax: c2802000 ebx: 00000968 ecx: 00000090 edx: c2802000 esi: c2801ffc edi: c01d39a4 ebp: c2802000 esp: c1ffbe98 Process swapper (pid: 1, process nr: 1, stackpage=c1ffb000) Stack: c01d39a4 00000000 c2c00000 00001000 c0192000 c2002000 00000000 000009b8 c1fe5260 c1ffbf28 c01d39a4 c01d39a4 c2802000 c1fe5260 c01d39a4 c01a16a2 00000002 c1ffbf28 c01d6480 0000004c 00000006 00000018 c1fe5260 00000001 Call trace: [<c2c00000>] [<c0192d95>] [<c0106000>] [<c0192712>] [<c019c5b5>] [<c0106000>] [<c011fcd4>] [<c0106093>] [<c0106517>] Code: 01 0e 89 d9 8a 44 24 10 fc f3 aa 89 e8 5b 5e 5f 5d 83
>>EIP; c01a551b <best_memset+6b/9c> <===== Trace; c2c00000 <END_OF_CODE+2a00688/????> Trace; c0192d95 <sound_install_audiodrv+f5/1e8> Trace; c0106000 <get_options+0/74> Trace; c0192712 <start_cards+106/110> Trace; c019c5b5 <soundcard_init+25/58> Trace; c0106000 <get_options+0/74> Trace; c011fcd4 <kswapd+0/c8> Trace; c0106093 <init+7/140> Trace; c0106517 <kernel_thread+23/30> Code; c01a551b <best_memset+6b/9c> 00000000 <_EIP>: Code; c01a551b <best_memset+6b/9c> <===== 0: 01 0e add %ecx,(%esi) <===== Code; c01a551d <best_memset+6d/9c> 2: 89 d9 mov %ebx,%ecx Code; c01a551f <best_memset+6f/9c> 4: 8a 44 24 10 mov 0x10(%esp,1),%al Code; c01a5523 <best_memset+73/9c> 8: fc cld Code; c01a5524 <best_memset+74/9c> 9: f3 aa repz stos %al,%es:(%edi) Code; c01a5526 <best_memset+76/9c> b: 89 e8 mov %ebp,%eax Code; c01a5528 <best_memset+78/9c> d: 5b pop %ebx Code; c01a5529 <best_memset+79/9c> e: 5e pop %esi Code; c01a552a <best_memset+7a/9c> f: 5f pop %edi Code; c01a552b <best_memset+7b/9c> 10: 5d pop %ebp Code; c01a552c <best_memset+7c/9c> 11: 83 00 00 addl $0x0,(%eax)
Compiler: gcc 2.7.2.3 System: Cyrix P166+ w/ 32Mb RAM Hardware: (boringly standard) Sb16 (driver compiled in the kernel) DLink PCI network card (Dec tulip driver, compiled in the kernel, with IP networking etc) S3 Virge video card. No SCSI, only IDE hard drives+CD. No other unusual stuff, just some modules which wouldn't have been loaded by that point anyway.
Colin
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |