lkml.org 
[lkml]   [1999]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.3.20 will not boot (PCI problem)
Martin Mares wrote:
: To be completely sure, can you switch on '#define DEBUG' in arch/i386/kernel/pci-pc.c
: and send me the boot messages before the crash?
:

Martin,

I have tried 2.3.20 on two of my boxes (P133 desktop,
and a P120 laptop), and both crash with the BIOS access mode and
work with direct access mode. Here are the messages from the laptop
(#define DEBUG 1 in pci-i386.h):

[...]
PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=15
PCI: PCI BIOS revision 2.10 entry at 0xfe73c
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Scanning for ghost devices on bus 0
PCI: Fetching IRQ routing table...
Unable to handle kernel paging request at virtual address 0000f9ce
printing eip:
c00fe779
...

Hope this helps, more info available on request

-Yenya

--
\ Jan "Yenya" Kasprzak <kas at fi.muni.cz> http://www.fi.muni.cz/~kas/
\\ PGP: finger kas at aisa.fi.muni.cz 0D99A7FB206605D7 8B35FCDE05B18A5E //
\\\ Czech Linux Homepage: http://www.linux.cz/ ///
/// While Linux is larger than Emacs, at least Linux has the excuse \\\
// that it needs to be. --Linus Torvalds \\

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:54    [W:0.035 / U:1.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site