Messages in this thread | | | Date | Fri, 8 Jan 1999 11:32:46 -0600 (CST) | From | root <> | Subject | 3c59x problem |
| |
I have had problems with the 3c59x driver in both 2.0.36 and in the pre2.2 kernels. Every once in a while, the driver will just stop working, and I have to do a ifdown eth0 rmmod 3c59x insmod 3c59x ifup eth0 to get it to start working again. This problem I did not find present in 2.0.34. My card is a 3c905B, and it is set up using the 192.168.1.1 address. I haven't found any rhyme or reason to it, but it seems to present the problem a few hours after boot. Then it is usually fine.
Sorry I can't be more specific, but I don't have time to fully test it.
Jonathan Bartlett johnnyb@shell.webzone.net
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |