lkml.org 
[lkml]   [1999]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.2.0-pre4 errors
I have compiled 2.2.0-pre4 for my smp system and run across some minor
problems. First of all the DMA-Support seems to be broken. In 2.2.0-pre1
it worked just fine, but in 2.2.0-pre4 it says, that dma is broken for my
first IDE drive. As hardware hasn't changed it must be a problem with the
IDE driver. Second problem is a minor one. Just a wrong detection on the
SCSI bus. I have a Yamaha CDRW writer attached to an Adaptec 2940 AU
controller. At initiliasation it detects it as a 6x/6x writer, which is
definitly wrong. It's an 6x reader, 4x CD-R and 2x CD-RW writer. Seems as
if both writing speeds were summed up instead of counted indepently.
Greetx!
Thomas

===================================================
|| I'm the Master DragonLord ||
|| I believe in the power of science ||
|| Thomas Rydl <5rydl@informatik.uni-hamburg.de> ||
===================================================


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.285 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site