lkml.org 
[lkml]   [1999]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectTCPdump
Date
Hi all.

How I can make tcpdump (preferrable, but other packet sniffer may be
helpful) work in 2.2.0pre*?

I've getting the following message:

tcpdump: snoop socket: Socket type not supported

Also, my DEC 21140 network card is telling me the following:

fox:/root# ifconfig eth0
eth0 Link encap: Ethernet HWaddr 00:00:E8:24:7A:38
inet addr:1.5.112.0 Bcast:1.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2175 erros:0 dropped:0 overruns:0 frame:1
TX packets:0 errors:18745 dropped:144 overruns:0 carrier:0
coll:0
Interrupt:10 Base address:0xf480

fox:/root# uptime
5:43pm up 13 min, 1 user, load average:0.00, 0.02, 0.02
fox:/root# lsmod
Module Size Used by
tulip 25076 1
fox:/root# _

I can ping, telnet, browse, etc.

Is there something i forget to do or something i need to do? I've enabled
the full-duplex of the card.

The configuration is basically the same as 2.0.36 (and work in this).

Thanks in advance.
--
Alexandre Hautequest
hquest@linuxbr.com.br
ICQ 8563517
"When I'm on the road, I'm indestructible. No one can stop me. But they
try..."


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.023 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site