Messages in this thread | | | Date | Fri, 29 Jan 1999 23:46:50 +0100 (MET) | From | (Guest section DW) | Subject | Re: PROBLEM: Illegal IDE probing |
| |
From wvmourik@usa.net Fri Jan 29 22:26:47 1999
Hello Andries,
] From: Willem van Mourik <wvmourik@usa.net> ] ] The 1,6Gb harddisk shows the illegal size 7680Mb instead of 1536Mb ] ] version 2.0.36: ] hda: SAMSUNG WNR-31601A (1600MB), 1536MB w/256kB Cache, CHS=780/64/63 ] ] version 2.2.1: ] hda: SAMSUNG WNR-31601A (1600MB), 7680MB w/256kB Cache, CHS=3900/64/63 ] ]Interesting. I can leave worrying about the detection to Andre. ]But I would like to understand this size change. ] ]So, in your case, what does the disk say, i.e., what is the hdparm output?
Here the 'hdparm' outputs you have asked for:
hdparm -I /dev/hda RawCHS=3121/16/63, CurCHS=3121/16/63, CurSects=3145968, LBA=yes, LBAsects=15728688
linux 2.0.36: hdparm -i /dev/hda RawCHS=3121/16/63, CurCHS=3121/16/63, CurSects=3145968, LBA=yes, LBAsects=3145968
linux 2.2.1: hdparm -i /dev/hda RawCHS=15603/16/63, CurCHS=3900/64/63, CurSects=15728688, LBA=yes, LBAsects=15728688
Very good. That makes it all clear. Yes, it was painful, it hurt the eye, to see the changes made to the geometry code by our new IDE maintainer. By now it is clear that every single change was buggy.
Please remove the lines
/* * This is a split test for drives less than 8 Gig only. * Drives less than 8GB sometimes declare that they have 15 heads. * This is an accounting trick (0-15) == (1-16), just an initial * zero point difference. */ if ((id->lba_capacity < 16514064) && (lba_sects > chs_sects) && ((id->heads == 15) || (id->heads == 16)) && (id->sectors == 63)) { if (id->heads == 15) id->cyls = lba_sects / (15 * 63); /* correct cyls */ if (id->heads == 16) id->cyls = lba_sects / (16 * 63); /* correct cyls */ return 1; /* lba_capacity is our only option */ }
from ide-disk.c, and report on whether this solves the size problem.
Andries
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |