Messages in this thread | | | From | Gerhard Fuellgrabe <> | Subject | 2.2.0-pre8: ATAPI-ZIP drive broken (ok in pre7) | Date | Wed, 20 Jan 1999 09:52:34 +0100 |
| |
Hi.
I just compiled the 2.2.0-pre8 after working a few days with pre7, and now the ZIP-drive refuses to work:
PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hdc: IOMEGA ZIP 100 ATAPI, ATAPI CDROM drive hdd: LTN244, ATAPI CDROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x50 ATAPI device hdc: Error: Illegal request -- (Sense key=0x05) Invalid field in command packet -- (asc=0x24, ascq=0x00) The failed "Mode Sense" packet command was: "5a 00 2a 00 00 00 00 00 18 00 00 00 "
Regards,
Gerry
-- Gerhard Fuellgrabe Phone: +49.5323.96788 Fax: 962044 Arnikaweg 34 E-mail: gerd@cacofonix.harz.de D-38678 Clausthal-Zellerfeld Ham-Radio: DK3NZ@DB0NHM.#NDS.DEU.EU http://www.harz.de/home/fuellgrabe
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |